#1: 206 with 18 ET wheels, what length bolt? Author: bobtabatha, Posted: Sat Oct 20, 2012 12:44 pm ---- Hi all
I bought a set of '206' wheel from ebay that have an offset of 18, rather than the standard 25. My question is do i need to fit longer bolts to compensate for the fact? The standard flat washer bolt thread is going 8mm into the hub.
Many thanks, mark
#2: Re: 206 with 18 ET wheels, what length bolt? Author: Seabook, Posted: Sat Oct 20, 2012 12:50 pm ---- yes, you will need longer bolts
#3: Re: 206 with 18 ET wheels, what length bolt? Author: bobtabatha, Posted: Sat Oct 20, 2012 12:56 pm ---- I have looked for some on e-bay but can't see what i need as the measurements are inconsistent, any suggestions?
#4: Re: 206 with 18 ET wheels, what length bolt? Author: Seabook, Posted: Sat Oct 20, 2012 1:00 pm ---- first you need to check if you wheels have flat seat or taper seat.
Then you will have to measure the thread length; in my memory for taper bolt you need 25mm thread and for flat seat bolt you need 32mm thread (for et25); so in your case you will need 7-10mm longer bolt
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17132
Online Now [97]:
Visitors: 96
Members: 0
Staff Online Now:
Page Views:
General
