#1: 180 Janspeed exhaust mounts Author: andylall, Location: Stoke On TrentPosted: Tue Nov 06, 2012 4:39 pm ---- Hi all.
Could anyone recommend a good set of exhaust mount rubbers that fit a 180 with a Cat back Janspeed system?.
I have searched and found about the powerflex just not sure if they will fit a 180 with a Janspeed system.
It needs doing ASAP as the banging sounds like the car is falling apart! which come to think about it may not be far from the truth!!
Thanks.
#2: Re: 180 Janspeed exhaust mounts Author: MattyP, Location: PlymouthPosted: Wed Nov 07, 2012 12:48 am ---- Super pro do a exhaust mount for the 180, myself and Jamie fitted 1, there is a link on jamie's project thread about 6 pages in
#3: Re: 180 Janspeed exhaust mounts Author: JamieM, Posted: Wed Nov 07, 2012 2:43 am ---- SuperPro is the only one available. Powerflex do not do one that makes the 180 exhaust sit well or at least without alot of adjusting.
Just don't change the second mount until the original starts to sag or you will end up needing to have your exhaust surround re-painted ( ; .
Quote::
The exhaust sitting p**sed since I got it has been one of my hates. It's hard to find a decent straight fitting bush for the 180 : Janspeed. However thus far this bugger has done the job, haven't road tested it yet so unsure if it's going to vibrate on the bumper at times. The exhaust doesn't touch but it's cloooose.
Anywhooo here's the pics.
So here's the before [note] it sits like it's smoked a funny cigarette yup...
& here is a side view
But here we have resolve I tell you!
wooo
Finally, I thought I'd make the car smell of blueberry's mmmmmmm
So there we go, If you have a 180 with a Janspeed and it's sagging like a middle age womans bits go for the poly bush by SuperPro part no SPF2435K.
#4: Re: 180 Janspeed exhaust mounts Author: andylall, Location: Stoke On TrentPosted: Wed Nov 07, 2012 10:56 am ---- Cheers fellas , oh believe me it's sagging !!:-)
#5: Re: 180 Janspeed exhaust mounts Author: 19Connor92, Location: Southend-On-seaPosted: Sun Apr 28, 2013 3:05 pm ---- was the janspeed a straight fix to the standard cat and do you have to make hangers for it?
#6: Re: 180 Janspeed exhaust mounts Author: L5_UKS, Location: West MidlandsPosted: Sun Apr 28, 2013 3:07 pm ---- Was a standard fit mate
#7: Re: 180 Janspeed exhaust mounts Author: 19Connor92, Location: Southend-On-seaPosted: Sun Apr 28, 2013 3:17 pm ---- cool, do you know best place to get a cat? thanks. new to the forum but could you please read my post bout sh*t idle?
#8: Re: 180 Janspeed exhaust mounts Author: broadblaster, Location: south coastPosted: Sun Apr 28, 2013 3:29 pm ---- speak to janspeed direct they maybe able to help you with the cat i found that my janspeeds hang fine on standerd 180 hangers tbh
#9: Re: 180 Janspeed exhaust mounts Author: Barking, Location: sarcasm-in-shedloadsPosted: Sun Apr 28, 2013 3:35 pm ---- Try getting rubbers from a 406 - mine was hanging until I got them.
They were less than a fiver and lasted 2 years. I can't remember which 406 they fitted, but they work on the Janspeed 180.
#10: Re: 180 Janspeed exhaust mounts Author: 19Connor92, Location: Southend-On-seaPosted: Sun Apr 28, 2013 3:42 pm ---- only looking for a standard cat?
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17132
Online Now [563]:
Visitors: 562
Members: 0
Staff Online Now:
Page Views:
General
