#1: Engine change Author: Deano, Posted: Wed Nov 21, 2012 10:36 am ---- Would a engine out of a 180 go straight into a 140 with out changing ecu or bsi n stuff
#2: Re: Engine change Author: Big_Rich180, Posted: Wed Nov 21, 2012 10:41 am ---- No.
It will fit in but it wont work.
#3: Re: Engine change Author: LeeThr, Location: North West WalesPosted: Wed Nov 21, 2012 10:44 am ---- Would be easier if it's a multiplexed 140, but still wouldn't be a straight swap. If it's a pre plex 140, dont even bother thinking about it unless you have a donor car.
#4: Re: Engine change Author: Deano, Posted: Wed Nov 21, 2012 12:06 pm ---- Does a 307 2.0 engine fit a 206 gti
#6: Re: Engine change Author: Deano, Posted: Wed Nov 21, 2012 12:41 pm ---- because my engine has seized and I can get one cheap out of a 307 would I need to change the ecu and would my original keys still work
#7: Re: Engine change Author: Addaz, Location: SuffolkPosted: Wed Nov 21, 2012 12:45 pm ---- An engine is an engine, just swap that and use all you 206 looms. You should be fine
#8: Re: Engine change Author: Deano, Posted: Wed Nov 21, 2012 12:51 pm ---- That's what I thought I am only changing the block but could do with knowing for sure the engine looks the same out of the 307 just don't want to take the block then him get rid of donor n me be stuck with n ecu so if I just change my block nothing else it should start up fine
#9: Re: Engine change Author: Deano, Posted: Wed Nov 21, 2012 1:10 pm ---- How do I tell if mine is multiplex or pre plex because will I have to check that the donor engine is comin out of the same
#10: Re: Engine change Author: LeeThr, Location: North West WalesPosted: Wed Nov 21, 2012 1:10 pm ---- As long as you only change the mechanical part and not any of the electrics you will be fine.
#11: Re: Engine change Author: rhian206, Location: StaffordshirePosted: Wed Nov 21, 2012 1:41 pm ---- they is a 1.4 quicksilver 206 in ebay with a GTI180 engine in with nitrous oxide so anything is possible
#12: Re: Engine change Author: LeeThr, Location: North West WalesPosted: Wed Nov 21, 2012 2:01 pm ----
rhian206 wrote:
they is a 1.4 quicksilver 206 in ebay with a GTI180 engine in with nitrous oxide so anything is possible
Yes it is possible, any 206 engine can be swapped around into any other 206, it's just 9 times out of 10, it's the 17/18 year old's trying to avoid the insurance, that by the time they spend the money buying all the bits and the time & labor to do it it would have come to the same price as just buying and insuring the other car in the first place.
#13: Re: Engine change Author: kobrakai1986, Location: Caerphilly/Hengoed/Ystrad MynachPosted: Wed Nov 21, 2012 2:18 pm ---- 307 engine should be the same but you would probably need to use 206 engine mounts, I would think most 2.0 engines around the same age from any Citroën or Peugeot would be the same? If your throwing in the 180 engine you would need a 180 ecu and I'm not 100% sure but you may need few other bits for the key to work.
#14: Re: Engine change Author: Deano, Posted: Wed Nov 21, 2012 2:58 pm ---- No the engine out of the 307 is 138bhp the same as my 206 I just need to know about this multiplex does the donor engine need to be the same as whatever mine is and how do I tell if mine is the same I have not changed 206 engine before can I leave the gearbox in and does Anyone know a link on changing the Cambrelt I might as well change everything why engine is out
#15: Re: Engine change Author: Deano, Posted: Wed Nov 21, 2012 3:03 pm ---- No the engine out of the 307 is 138bhp the same as my 206 I just need to know about this multiplex does the donor engine need to be the same as whatever mine is and how do I tell if mine is the same I have not changed 206 engine before can I leave the gearbox in and does Anyone know a link on changing the Cambrelt I might as well change everything why engine is out
#16: Re: Engine change Author: kobrakai1986, Location: Caerphilly/Hengoed/Ystrad MynachPosted: Wed Nov 21, 2012 3:07 pm ---- How old is your car?
#17: Re: Engine change Author: Deano, Posted: Wed Nov 21, 2012 4:02 pm ---- 2002 it had only done 53 thousand gutted
#18: Re: Engine change Author: Deano, Posted: Wed Nov 21, 2012 4:05 pm ---- 2002 it had only done 53 thousand gutted
#19: Re: Engine change Author: Deano, Posted: Wed Nov 21, 2012 5:18 pm ---- Will I have to get engine with same engine code and where will I find engine code anyone know a how to link for changing cambelt 2.0 140
#20: Re: Engine change Author: macca1411, Location: Westhoughton, LancashirePosted: Thu Nov 22, 2012 7:56 am ---- If yours is 2002, it's multi plexed. Anything pre October 2001 is pre plexed.
Answered the engine code location question in your other thread.
We could do with admin merging all your threads because the same questions are being asked in each one and it's getting too easy to lose track of what advise you have already been given
#21: Re: Engine change Author: Deano, Posted: Thu Nov 22, 2012 8:00 am ---- Ok mate how do u do that because I am havin to look on each one too as I am new to this site
#22: Re: Engine change Author: macca1411, Location: Westhoughton, LancashirePosted: Thu Nov 22, 2012 8:11 am ---- PM an admin and ask them if they can be merged. On some forums it's possible, but don't know if they can do it on here.
#23: Re: Engine change Author: Deano, Posted: Thu Nov 22, 2012 8:43 am ---- Can u leave the gear box in when u take the block out on one of these ?
#24: Re: Engine change Author: Deano, Posted: Thu Nov 22, 2012 8:44 am ---- Can u leave the gear box in when u take the block out on one of these ? Might aswell do watepump and clutch, cambelt why it is out
#25: Re: Engine change Author: Harry, Location: StaffordPosted: Thu Nov 22, 2012 10:10 am ---- It could have easily not been registered until 02 so you can't just assume it's multiplexxed
The easiest way would be to look at the fuse boxes if it's still in the car but I don't know what year multiplexxing started on 307s or even if they all are
VIN numbers are the only way you can guarantee it without looking at it yourself
#26: Re: Engine change Author: LeeThr, Location: North West WalesPosted: Thu Nov 22, 2012 10:30 am ----
Harry wrote:
It could have easily not been registered until 02 so you can't just assume it's multiplexxed
The easiest way would be to look at the fuse boxes if it's still in the car but I don't know what year multiplexxing started on 307s or even if they all are
VIN numbers are the only way you can guarantee it without looking at it yourself
307's are all multiplexed, pretty sure it's the first car peugeot went all out on the multiplexed system and cocked it up big time.
#27: Re: Engine change Author: Deano, Posted: Thu Nov 22, 2012 11:01 am ---- Mine is a 206 what's the difference with the fuse boxes like
#28: Re: Engine change Author: Harry, Location: StaffordPosted: Fri Nov 23, 2012 7:10 am ---- That rings a bell lee
It's just an obvious way to see if it's multiplexxed or not on another vehicle, but look in lees starter guide to find out what type your car is.
#29: Re: Engine change Author: VorTechS, Location: Gloucestershire, UKPosted: Fri Nov 23, 2012 7:18 am ---- Merging them might cause more confusion. Pick a topic to keep active, and let me know which are the others and I'll lock them!
#30: Re: Engine change Author: Deano, Posted: Fri Nov 23, 2012 2:19 pm ---- I changed a engine on a rover once and u had to keep the flywheel with the ecu anyone know if that's the same on here or not started takin engine out today new one comes Monday yipee
#31: Re: Engine change Author: sean.r.steward, Location: norfolkPosted: Fri Nov 23, 2012 8:59 pm ---- t16 it
#32: Re: Engine change Author: Deano, Posted: Sat Nov 24, 2012 4:20 am ---- What's t16
#33: Re: Engine change Author: Edward, Location: In the garagePosted: Sat Nov 24, 2012 5:18 am ---- A rare engine made in such small number it's largely irrelevant.
#34: Re: Engine change Author: Deano, Posted: Sat Nov 24, 2012 6:20 am ---- Guess I will just stick with the 2.0 then
#35: Re: Engine change Author: Deano, Posted: Mon Nov 26, 2012 6:25 am ---- Does any one know the answer to my question then does the fly wheel have th go onto the donor engine or is it not the same on these
#36: Re: Engine change Author: Deano, Posted: Mon Nov 26, 2012 6:25 am ---- Does any one know the answer to my question then does the fly wheel have th go onto the donor engine or is it not the same on these
#37: Re: Engine change Author: Edward, Location: In the garagePosted: Mon Nov 26, 2012 6:32 am ---- All the flywheels are the same...
#38: Re: Engine change Author: Deano, Posted: Mon Nov 26, 2012 6:36 am ---- Thank you it just I changed one on a river as I said above and I had to take it apart to change flywheel because the fly wheel had to stay with ecu dodhh
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [240]:
Visitors: 239
Members: 0
Staff Online Now:
Page Views:
General
