#1: Key stuck in the ignition :( Author: ashleygilbert92, Location: BristolPosted: Tue Dec 04, 2012 4:03 pm ---- Can anyone help? The other night I pulled up on my drive and as usual went to turn off my engine but the key wouldn't turn, it was literally jammed solid. I had to stall my car to turn it off and I disconnected the battery as all the electrics stayed on, I managed to pull the key out (with a struggle) and slightly bending the key but now the key doesn't slide into tho ignition smoothly and doesn't turn the car on or lock the doors manually, is this simply a case of getting a new ignition barrel and key? Then swapping the chip from my old key to my new key? Would that work?
#2: Re: Key stuck in the ignition :( Author: bezford, Location: darlingtonPosted: Wed Dec 05, 2012 8:14 am ---- Cant u just get a new key cut?
#3: Re: Key stuck in the ignition :( Author: ashleygilbert92, Location: BristolPosted: Tue Jan 01, 2013 9:25 am ---- ive got the key out of the ignition but the barrell is f****d inside. ive fitted a new barrel but now it fires but doesnt start.
#4: Re: Key stuck in the ignition :( Author: iainlovatt, Posted: Tue Jan 01, 2013 10:00 am ---- Immobiliser??
#5: Re: Key stuck in the ignition :( Author: bezford, Location: darlingtonPosted: Tue Jan 01, 2013 11:14 am ---- Im still not sure about these locks and keys and chips.immobilzers.bsi.ecu.ariel ring.central lockin....the only real remedy seems to be an expensive one as i know a mate who had similar problem with his clio...french...and he had to spend around £250 and that was doing it the cheapest way as renault were gonna charge doubleish...he sourced his keys/barrel cheap off net to save money but still dear and im not sure on peugeots what to change and what u can keep and still use?????????SOMEONE SHOULD DO A FULL HOW TO...TO DISPELL MYTHS AND GIVE ADVICE.....i would but i dont know the full facts...
#6: Re: Key stuck in the ignition :( Author: ukskater01, Location: sutton surrey/welwyn garden cityPosted: Tue Jan 01, 2013 11:25 am ---- Have you taken the transponder chip out of the old bent key and put it in the new one? Also did you fit the barrel as I had the exact same problem. When I fitted the new barrel I had the thick red and yellow wires the wrong way round in the plug in the fusebox and mine wouldn't fire either.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [303]:
Visitors: 302
Members: 0
Staff Online Now:
Page Views:
General
