#1: Uz's 180...FB Album Link Added Author: Uz, Location: No Man's LandPosted: Sun Feb 03, 2013 12:28 pm ---- Make: Peugeot
Model: 206
Spec: GTi 180
Colour: Obsidian Black Metalic
Full Progress Imagery on Facebook (album is publically viewable) - Uz's 180 Progress Blog
Current Spec List (will update this as much as I can);
Interior
- Custom Built Centre Console with MFD in HU DIN slot & custom Double Din conversion.
- Starter button in lighter position
- Cigarette lighter repositioned to inside of glovebox
- Repositioned Hazard Button
- Hazard Button Switch Surround wrap'd in Black Alcantara
- Black Alcantara trim'd centre console
- Black Alcantara trim'd binnacle
- Black Alcantara trim'd airbag switch surround
- Black Alcantara trim'd rooflining
- Black Alcantara trim'd dash corner vents
- Black Alcantara trim'd fuseboard cover
- Black Alcantara trim'd door handle surround
- Black Alcantara trim'd rooflining with secondary rooflight
- Black Alcantara trim'd A-Pillars w/ Satin Black ultrasonic pods
- Black Alcantara trim'd B-Pillars w/ Satin Black Sliders
- Black Alcantara trim'd C-Pillars w/ bootlight smoothed.
- Black Alcantara trim'd parcel shelf
- x2 3-banked White LED SMD strips as bootlights
- MFD & CC controls LED colour changed to Blue
Audio
- Pioneer AppRadio DA100 Double Din iPod/Android headunit
- CMOS Nightvision Reversing Camera in OEM plate light position
Exterior
- Smoked 470x100 front plate
- Smoked standard sized rear plate
- Brake Calipers Painted Yellow
- Custom DRL Phase 2 Crystal Headlights finished in Obsidian Black
- Obisidian Black Foglights
- Smoke Tinting Headlight Film
- Smoke Tinting Foglight Film
- Obsidian Black Front Badge
- RGM Bonnet Vent with custom grille
- Black SP Grille with Yellow detailing strips
- Leon Cupra R Splitter
- OEM Styled Front & Rear Mudflaps
- SP Arches
- 3D Carbon Fibre Vinyl wrap'd Mirror Caps
- 3D Carbon Fibre Vinyl wrap'd Phase 2 Bootstrip
- 3D Carbon Fibre Vinyl wrap'd tailgate top
- Smoked Indicators
- Smoked FK Automotive rear lights
- Debadged Tailgate
- Small Sharkfin Aerial
- Dewipered tailgate
- Obsidian Black Gutter Strips
- Team Heko Wind Deflectors
Wheels
- 8Jx17" ET18 front ET8 rear MAM MT1 Alloy Wheels
- 205/40 R17 Yokohama Parada Spec 2 tyres
Engine
- Janspeed Stainless Steel Exhaust System
- BMC CDA 85-150 Carbon Fibre Induction Kit
- Oil Catch Tank
This is how the car stands currently (will update this pic as and when the cars look changes;
Work to be done;
Exterior
- Cupra R Splitter (possibly wrapped in 3D Carbon Fibre)
- 3D Carbon Fibre Vinyl wrap'd roof with emboss'd look 'fuzzeebear' logo
- Finish modifying the RGM vent mesh
- Finish Flaring Rear Arches
- Modify the SP Rear Arches & Bonded to quarters
Wheels
- 16" Team Dynamics Pro Race 1.2 in Black (hopefully be with me before the end of the week)
- 205/45 R16 Federal SS 595 tyres
- 20mm spacers
- Black Anodized Tuner Bolts
Interior
- OEM Armrest
Engine
Brakes
- 302mm discs from a C4 VTS
Suspension
- H&R 55mm Lowering Springs
Audio
- Front Components
- 4 Channel Amp for Front Components (run actively)
- Rear Components
- Subwoofer
- Monoblock Amp for Subwoofer
- False Floor
Full progress blog being written as we speak... once it's done I'll upload it for all comments Last edited by Uz on Sun Feb 17, 2013 3:27 pm; edited 7 times in total
#2: Re: Uz's 180 Author: MattyP, Location: PlymouthPosted: Sun Feb 03, 2013 12:40 pm ---- friggin awesome mate!
#3: Re: Uz's 180 Author: Uz, Location: No Man's LandPosted: Sun Feb 03, 2013 1:15 pm ----
MattyP wrote:
friggin awesome mate!
Thanks mate
#4: Re: Uz's 180 Author: shell-vt, Location: durhamPosted: Sun Feb 03, 2013 2:20 pm ---- nice pug ......
#5: Re: Uz's 180 Author: tom2581, Location: wolverhamptonPosted: Sun Feb 03, 2013 4:53 pm ---- loving the centre console double din, got any more pics or how to on it buddy ?
#6: Re: Uz's 180 Author: P6RAF, Location: PlymouthPosted: Sun Feb 03, 2013 5:17 pm ---- Pretty awesome spec !!
#7: Re: Uz's 180 Author: Uz, Location: No Man's LandPosted: Mon Feb 04, 2013 1:15 am ---- Thanks guys... Spec list is still growing, but has gotten to that point in less than a month. Car was bought completely standard with just the Janspeed System, OMP brake pads and RGM Bonnet Vents.
Unfortunately there is only a couple of pics of the build for the centre console but it was completely custom designed and built in-house. The top, double din conversion is a Connect2 kit they did at the start of last year which just fitted poorly and was far too big. So after a lot of cutting (both off the height and width) and fibreglassing it is how it stands all wrapped up.
#8: Re: Uz's 180 Author: iainlovatt, Posted: Mon Feb 04, 2013 3:20 am ---- Looks smart that,However i liked the old wheels, sorry,
#9: Re: Uz's 180 Author: Uz, Location: No Man's LandPosted: Mon Feb 04, 2013 3:33 am ----
iainlovatt wrote:
Looks smart that,However i liked the old wheels, sorry,
Thanks Iain... worry not though, I have new wheels on the way, and the MAMs are only temporarily. My old PR1's were sold because I had them catching on the rear arches when I had passengers in the rear.
#10: Re: Uz's 180 Author: P6RAF, Location: PlymouthPosted: Mon Feb 04, 2013 6:34 am ---- I think they're the same wheels as Diane Paterson, boss of Ecosse, had on her 106.
Even had a space saver made to match.
#11: Re: Uz's 180 Author: Uz, Location: No Man's LandPosted: Mon Feb 04, 2013 6:52 am ----
P6RAF wrote:
I think they're the same wheels as Diane Paterson, boss of Ecosse, had on her 106.
IMAGE#1
IMAGE #2
They are indeed. These have been taken off my SW to use temporarily while I went back on the hunt for a new set of wheels in 16s. Last edited by Uz on Mon Feb 04, 2013 11:03 am; edited 1 time in total
#12: Re: Uz's 180 Author: JamieM, Posted: Mon Feb 04, 2013 8:19 am ---- Looks nice mate, not really a fan of sc3n3 rims on a sporty car but with the Team D's then we are talking!
Good idea with the 180 engined VTS discs, were they a straight fit with std 180 pads?
Looking good!
#13: Re: Uz's 180 Author: Uz, Location: No Man's LandPosted: Mon Feb 04, 2013 11:05 am ----
JamieM wrote:
Looks nice mate, not really a fan of sc3n3 rims on a sporty car but with the Team D's then we are talking!
Good idea with the 180 engined VTS discs, were they a straight fit with std 180 pads?
Looking good!
Thanks mate... not a fan of the wheels on the 180 myself tbh... look nice but do the car no justice. Handling is p**s poor and the car just doesn't feel like what it did on my old Pro Races.
Yeah, going off what Mattie said when he had a C4 VTS brake setup, the calipers and carriers are exactly the same with the GTI 180 pad and then it's literally just the discs that are bigger.
#14: Re: Uz's 180...FB Album Link Added Author: Uz, Location: No Man's LandPosted: Sun Feb 17, 2013 3:31 pm ---- I've added a link to my facebook album where the entire progress blog is currently.
The link is in the opening post so feel free to check it out and see what the cars developed into since I've owned it.
The link is available to be viewed by the public... feel free to comments and criticise on here.
I am writing the Progress Blog properly (on word and then post as one piece) but it's going to take a while lol so please bare with me.
#15: Re: Uz's 180...FB Album Link Added Author: MattyP, Location: PlymouthPosted: Sun Feb 17, 2013 3:57 pm ---- keep it coming mate, mine unfortunately seems to be in need of bodywork repair than actual styling improvements lol
#16: Re: Uz's 180...FB Album Link Added Author: Uz, Location: No Man's LandPosted: Sun Feb 17, 2013 4:16 pm ----
MattyP wrote:
keep it coming mate, mine unfortunately seems to be in need of bodywork repair than actual styling improvements lol
Mine due into the bodyshop as well mate... it needs the dent on the quarter sorting out (hopefully they can pop it out via the paintless method) and then the front end sprayed due to the stone chips. But don't really want it doing until just before the show season starts.
#17: Re: Uz's 180...FB Album Link Added Author: MattyP, Location: PlymouthPosted: Sun Feb 17, 2013 4:25 pm ---- my bonnet needs doing, the passenger door needs doing due to some t**t hitting it, the rear bumper needs re-painting and the drivers door needs painting due to paint flicking
#18: Re: Uz's 180...FB Album Link Added Author: Sadako, Posted: Tue Feb 19, 2013 4:40 pm ---- still can't decide wtf to do with mine tbh its depressing
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [261]:
Visitors: 260
Members: 0
Staff Online Now:
Page Views:
General
