#1: Project sleeper Author: Edward, Location: In the garagePosted: Mon Feb 08, 2010 1:42 pm ---- Just start a new topic off...the car goes in this Saturday to Ecosse for the throttle bodies to be fitted.
So from the beginning...way back in 2004...
Suspension got fitted...
Eibach Pro Kit springs, Bilstein Sport dampers, Peugeot Sport 21mm torsion bars (gravel rally spec).
Then some GTi 180 front brakes
Then some Goodridge braided hoses...
Then the 22mm GTi 180 rear roll bar
Then a Richard Longman cylinder head
Then a Maniflow 4-2-1 manifold and 2.5" system with 200cell cat.
During the summer I fitted some Peugeot Sport GP A wishbones and various other new suspension parts.
So this weekend it's going to Ecosse for the throttle bodies to be fitted which means I've had to do some shopping to prepare for the job.
Jenvey inlet manifold
Then an ACT products/ Jenvey/ Longman carbon airbox.
I also bought a new water pump, rocker cover gaskets, hydraulic lifters and a GTi 180 inlet manifold gasket. A new clutch has been fitted too.
It's also had a new dipstick fitted (Recommended for any older style 138 GTi)
In the last few weeks it's also had some new front discs and pads.
It all looks completely standard.
Last edited by Edward on Mon Feb 08, 2010 1:55 pm; edited 2 times in total
#2: Re: Project sleeper Author: AJS, Location: ScotlandPosted: Mon Feb 08, 2010 1:45 pm ---- Cant wait for the work to be done at Ecosse
Will you be up over a weekend at all? Im only down the road from there...
Oh and great to have you back Edward!
#3: Re: Project sleeper Author: Jamie, Location: Ring y0Posted: Mon Feb 08, 2010 1:46 pm ----
#4: Re: Project sleeper Author: nakednakeddave, Location: aberdeenPosted: Mon Feb 08, 2010 1:46 pm ---- looks like its goin to be a bit of a beast, id love the suspension setup youve got
#5: Re: Project sleeper Author: Lecktorious, Location: ScotlandPosted: Mon Feb 08, 2010 1:47 pm ---- Might pop along and say hello on Saturday
#6: Re: Project sleeper Author: Cr4zYb0y, Location: SalisburyPosted: Mon Feb 08, 2010 1:47 pm ---- Looking forward to seeing this all done and dusted mate..!
#7: Re: Project sleeper Author: twed207, Location: borders, near carlisle.Posted: Mon Feb 08, 2010 2:04 pm ---- car looks ace edward! i think that's the first time i've ever seen it! lol
it's gonna sound orgasmic once the TB's are in!!
#8: Re: Project sleeper Author: mattievrs, Location: LeicesterPosted: Mon Feb 08, 2010 2:26 pm ---- First time ive seen the car ever! lol
What power you hoping for Edward?
#9: Re: Project sleeper Author: Jamie, Location: Ring y0Posted: Mon Feb 08, 2010 2:27 pm ---- Major love for the car, the man and the thread!
#10: Re: Project sleeper Author: Alan_206HDi, Location: Hatfield Heath, HertsPosted: Mon Feb 08, 2010 2:33 pm ---- Very nice indeed! What year is the car?
#11: Re: Project sleeper Author: misskayleigh, Location: Kings Lynn, NorfolkPosted: Mon Feb 08, 2010 2:48 pm ---- i love your car! look forward to seeing everything done to it!
#12: Re: Project sleeper Author: =ZiAn=, Location: SloveniaPosted: Mon Feb 08, 2010 3:09 pm ---- Very very nice, I see you've been spending quite some money as those are some of the best if not the best parts for modification (eibach, bilstein jenvey, etc.) . Will you be changing the cams as well? If so, which ones will you use? Also what ECU will you install?
#13: Re: Project sleeper Author: Jamie, Location: Ring y0Posted: Mon Feb 08, 2010 3:11 pm ---- Ecosse seem to like Omex/Emerald iirc
#14: Re: Project sleeper Author: Edward, Location: In the garagePosted: Mon Feb 08, 2010 3:20 pm ---- Yes it's getting 42mm Jenveys, Piper Ultimate Road cams and Piper verniers fitted. Ecosse use Omex ECU's.
#15: Re: Project sleeper Author: Ruffy_206, Location: BristolPosted: Mon Feb 08, 2010 5:25 pm ---- i love what you have done to it mate. keep up the good work
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [70]:
Visitors: 69
Members: 0
Staff Online Now:
Page Views:
General
car looks ace edward! i think that's the first time i've ever seen it! lol
. Will you be changing the cams as well? If so, which ones will you use? Also what ECU will you install?
