#1: phase 2 rears fitted sweet, but....... Author: tom2581, Location: wolverhamptonPosted: Wed Mar 13, 2013 12:25 pm ---- i fitted phase 2 rear lights today when it wasnt snowing, tbh they look a lot better than the phase 1 apart from the enormous gap between boot lid and lights is this normal or anyway to rectify ?
#3: Re: phase 2 rears fitted sweet, but....... Author: MrBSI, Location: What's it to you? ? ?Posted: Wed Mar 13, 2013 1:03 pm ---- I take it you located the front peg in to the clear plastic bung in the body correctly?
I take it you located the front peg in to the clear plastic bung in the body correctly?
yup i even triple checked everything, i just under impression its a poor fit, i'll have a gander at some the 206's on car park friday an compare lol
#5: Re: phase 2 rears fitted sweet, but....... Author: macca1411, Location: Westhoughton, LancashirePosted: Wed Mar 13, 2013 1:37 pm ---- Did they come with the foam seal to stop water getting into the boot?
Did they come with the foam seal to stop water getting into the boot?
yup the foam seal is there on back of the lights, i even slackened them off thinking i had over tightened them but made no difference to how the boot lid sits ?
#7: Re: phase 2 rears fitted sweet, but....... Author: A18NHH, Location: MiddlesbroughPosted: Wed Mar 13, 2013 2:44 pm ---- they're not from a 206CC are they?
Sure someone will say this shouldn't matter though?
#8: Re: phase 2 rears fitted sweet, but....... Author: MrBSI, Location: What's it to you? ? ?Posted: Wed Mar 13, 2013 3:33 pm ----
A18NHH wrote:
they're not from a 206CC are they?
Sure someone will say this shouldn't matter though?
It WONT
Only the black plastic splash shield is different between CC / hatch & there only clipped on & swappable anyway
#9: Re: phase 2 rears fitted sweet, but....... Author: tom2581, Location: wolverhamptonPosted: Wed Mar 13, 2013 3:39 pm ---- no they were off a member on here a smashed up 3 door seen the car in person so deffo not a cc lol
#10: Re: phase 2 rears fitted sweet, but....... Author: gpvecchi, Location: ItalyPosted: Wed Mar 13, 2013 4:41 pm ---- Well, simple solution... Loose the nut that keeps light in place... If it's too tight it leaves gap, if it's too loose, light will move.
#11: Re: phase 2 rears fitted sweet, but....... Author: Lecktorious, Location: ScotlandPosted: Wed Mar 13, 2013 5:52 pm ---- Try adjusting the tailgate latch. You might be able to get the tailgate sitting more flush, reducing the panel gap.
#12: Re: phase 2 rears fitted sweet, but....... Author: tom2581, Location: wolverhamptonPosted: Thu Mar 14, 2013 7:35 am ----
gpvecchi wrote:
Well, simple solution... Loose the nut that keeps light in place... If it's too tight it leaves gap, if it's too loose, light will move.
yeah i tried that they kept movin so tightened back up, gonna see if i can adjust the latch a little, i just swapped out the boot strip for a phase 2 only to find laquer damage not havin much luck with this boot lid at all might see if i can find another anyone got one cheap in diablo red lol
#13: Re: phase 2 rears fitted sweet, but....... Author: V9977, Location: Athens, GreecePosted: Thu Mar 14, 2013 12:15 pm ---- Bend the tailgate,
OR add another set of seals on the back to take the slack,
OR fit Ph1 set as the geniuses at Peugeot originaly intended.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17132
Online Now [105]:
Visitors: 104
Members: 0
Staff Online Now:
Page Views:
General
is this normal or anyway to rectify ?
