#16: Re: 206cc 2.0 wont rev properly and loosing power Author: chris_loader, Location: st albansPosted: Tue Mar 19, 2013 2:54 pm ---- yea when you mentioned the coil pack i had a quick look at prices and dam thats alot lol
#17: Re: 206cc 2.0 wont rev properly and loosing power Author: chris_loader, Location: st albansPosted: Tue Mar 19, 2013 2:59 pm ---- this problem could come from so many places
#18: Re: 206cc 2.0 wont rev properly and loosing power Author: MrBSI, Location: What's it to you? ? ?Posted: Tue Mar 19, 2013 3:10 pm ---- Pay a professional to diagnose the problem.
This thread is turning in to a game of Guess Who.
OR you could just waste money repeatedly throwing parts at it till you sort it.
Choice is yours
#19: Re: 206cc 2.0 wont rev properly and loosing power Author: LeeThr, Location: North West WalesPosted: Tue Mar 19, 2013 3:30 pm ----
Edward wrote:
£102 for a coil pack from Euro Car Parts. Can get 25% discount on that though.
I have a working coil pack for sale if you need one to try.
#20: Re: 206cc 2.0 wont rev properly and loosing power Author: Mr-Tigger, Location: EssexPosted: Tue Mar 19, 2013 4:41 pm ---- coilpack from stealership is £95 if u ask nicely but as above,would imagine that would cause misfire too,or even OBD fault for one of the cyliners? when u say runs map,so its been remapped then? too ignore maf,lambda etc?
#21: Re: 206cc 2.0 wont rev properly and loosing power Author: Edward, Location: In the garagePosted: Tue Mar 19, 2013 4:43 pm ----
Mr-Tigger wrote:
when u say runs map,so its been remapped then? too ignore maf,lambda etc?
map = MAP sensor.
MAF = not fitted to EW10 engine.
#22: Re: 206cc 2.0 wont rev properly and loosing power Author: ukskater01, Location: sutton surrey/welwyn garden cityPosted: Tue Mar 19, 2013 5:19 pm ---- I've found new coilpacks for £45 but that's with trade discount
#23: Re: 206cc 2.0 wont rev properly and loosing power Author: Mr-Tigger, Location: EssexPosted: Tue Mar 19, 2013 5:38 pm ---- oooooh cheers edward lol
#24: Re: 206cc 2.0 wont rev properly and loosing power Author: chris_loader, Location: st albansPosted: Mon Mar 25, 2013 12:24 pm ---- a little update the problems has its bad days and they its worse days lol so i was looking at the coil pack and noticed that the wires to the plug the outer plastic casing had been worn away on 2 of the wires so i wraped some tape round them and tried to rev the engine but still no luck, would the wires touching cause damage to the coil pack,
i do need to find another coil pack to try and see if it is that,
as i kept driving the car i kept checking for codes and still nothing
#25: Re: 206cc 2.0 wont rev properly and loosing power Author: chris_loader, Location: st albansPosted: Mon Mar 25, 2013 12:26 pm ---- im guessing i must have the ew10 engine then
#26: Re: 206cc 2.0 wont rev properly and loosing power Author: chris_loader, Location: st albansPosted: Mon Mar 25, 2013 12:55 pm ---- one of the codes it has brought up before was about the air intake temp sensor which i have read can cause the anti pollen and cat fault and cause loss of power etc
#27: Re: 206cc 2.0 wont rev properly and loosing power Author: chris_loader, Location: st albansPosted: Mon Mar 25, 2013 1:02 pm ---- and read other people had problems with trottle body motors
#28: Re: 206cc 2.0 wont rev properly and loosing power Author: chris_loader, Location: st albansPosted: Mon Mar 25, 2013 1:05 pm ---- where is the air intake temp sensor as when i looked at the trottle body there are a few sensors on it
#29: Re: 206cc 2.0 wont rev properly and loosing power Author: Edward, Location: In the garagePosted: Mon Mar 25, 2013 2:01 pm ---- It's a grey sensor on the throttle body that sits in the air flow. If you need one I've got one but I wouldnt think it would make a massive difference to the running of the engine. Every extra 10 degrees needs 3% more fuel so unless the sensor is telling the engine something stupid I wouldnt think it was at fault, If in doubt disconnect it and see what happens. It's a small player in running engines.
#30: Re: 206cc 2.0 wont rev properly and loosing power Author: chris_loader, Location: st albansPosted: Tue Mar 26, 2013 4:02 am ---- Ohh right OK would the broken wires touching kill the coil pack
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [54]:
Visitors: 53
Members: 0
Staff Online Now:
Page Views:
General
but as above,would imagine that would cause misfire too,or even OBD fault for one of the cyliners? when u say runs map,so its been remapped then? too ignore maf,lambda etc?
