#1: Panel C Pillar Author: 206gti_chris, Location: SussexPosted: Tue Apr 23, 2013 9:17 am ---- Its only a niggle but on both my C pillars the bit that i assume is suppose to " clip " in the corner closest to the rear quarter window never clips in!
Popped them back in countless times and they just keep re offending and creates a nice rattle
Anyone else get this ?
Im considering putting a chunk of tiger seal on the clip and be done with it not sure if id ever need to take the panel of though
#2: Re: Panel C Pillar Author: Ghosty, Location: WiltshirePosted: Tue Apr 23, 2013 11:43 am ---- what part are you refering to, pic would be of help, i dont currently have my 206, so i cant run out and look, but if its just the interior plastics, then the only reason for removal would be to fit rear speakers (there is however a way to do it without removal), and to fit a new rear seatbelt. beyond that till i see the bit your on about i cant offer any further help.
#3: Re: Panel C Pillar Author: 206gti_chris, Location: SussexPosted: Tue Apr 23, 2013 2:13 pm ---- couldnt upload the pic earlier not sure why, but here it is
#4: Re: Panel C Pillar Author: gpvecchi, Location: ItalyPosted: Tue Apr 23, 2013 2:52 pm ---- My old 1.6 did it. I put a little duct tape (the one made in cloth) on the lip of the pillar that slips inside panel. It worked...
#5: Re: Panel C Pillar Author: Ghosty, Location: WiltshirePosted: Tue Apr 23, 2013 2:53 pm ---- Right, that part only needs to come off when i have stated above, so its your choice, but are you missing the metal part that goes round the plastic, i think it should have one.
#6: Re: Panel C Pillar Author: gpvecchi, Location: ItalyPosted: Tue Apr 23, 2013 3:03 pm ---- There's no metal part in that place... It's just a plastic lip...
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy