#1: Left Dip beam does not work Author: Alexi1751, Posted: Sun May 12, 2013 4:10 am ---- Hi there I am new to the forums and I need assistance
I looked for topics like this but none came up on my search
The problem is that I have recently installed new after market headlights for my
2003 1.6 16v quicksilver but after instillation all the lights work bar from
the left dip beam....
I have tried using different bulbs(H7only fit) and know that it is not
the lighting unit as it works on the other side.
How ever engine fuse box fuses F9 & F10 only one of them
Is receiving power as when I remove 10 right dip goes off.
Replacing F9 does nothing there for is it the relay??
Or am I missing something completely easy to fix
#2: Re: Left Dip beam does not work Author: Steve206, Location: UKPosted: Sun May 12, 2013 4:48 am ---- What happens with your old lights in?
#3: Re: Left Dip beam does not work Author: Alexi1751, Posted: Sun May 12, 2013 4:51 am ---- Old lights are out of the question previous owner did an awful job of fitting, I believe he knew
of this problem and bridged power from the right hand side hence there was a wire running
across the bonnet, but I want to resolve this problem
#4: Re: Left Dip beam does not work Author: iainlovatt, Posted: Sun May 12, 2013 5:40 am ---- Bad earth on the light? Is there power getting done the cable? Follow the cable to see if there is any breaks!!
#5: Re: Left Dip beam does not work Author: Steve206, Location: UKPosted: Sun May 12, 2013 5:58 am ----
Alexi1751 wrote:
Old lights are out of the question previous owner did an awful job of fitting, I believe he knew
of this problem and bridged power from the right hand side hence there was a wire running
across the bonnet, but I want to resolve this problem
So you only told us half the problem?
Sounds like your wiring is at fault then, do as ian said and trace all the wires.
#6: Re: Left Dip beam does not work Author: Alexi1751, Posted: Sun May 12, 2013 6:13 am ---- Ok fixed it traced the orange dip wire back thanks Ian there was a bad connection between that and the fuse box and used my electro meter to gauge whether power was coming through at both sides
Thanks for your help how do I get set this as solved ??
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [179]:
Visitors: 178
Members: 0
Staff Online Now:
Page Views:
General
