#1: engine turning but not fireing Author: Andy_Boo, Posted: Fri May 17, 2013 3:52 pm ---- hi all could anybody tell or show me where the fuel line comes into the engine I need to check if fuels getting there thank you for the replies in advance
#2: Re: engine turning but not fireing Author: macca1411, Location: Westhoughton, LancashirePosted: Fri May 17, 2013 4:06 pm ---- Which engine?
Are you sure it's not the immobiliser preventimg the spark?
#3: Re: engine turning but not fireing Author: J206PUG, Location: UKPosted: Fri May 17, 2013 4:11 pm ---- Join the club
#4: Re: engine turning but not fireing Author: Andy_Boo, Posted: Fri May 17, 2013 4:16 pm ---- its a 1.1 petrol. and it sounds like lack of fuel everything else works lights windscreen wipers hazards surely if it was on none of the above would work?
#5: Re: engine turning but not fireing Author: Steve206, Location: UKPosted: Fri May 17, 2013 5:11 pm ---- Is it priming?
#6: Re: engine turning but not fireing Author: macca1411, Location: Westhoughton, LancashirePosted: Sat May 18, 2013 4:55 am ----
Andy_Boo wrote:
its a 1.1 petrol. and it sounds like lack of fuel everything else works lights windscreen wipers hazards surely if it was on none of the above would work?
The immobiliser prevents the spark being sent to the sparkplugs from the ECU and possibly cuts off the fuel pump (MrBSI?). It's not an electrical isolation device.
A common fault on a pre-plex is the aerial in the steering column going faulty and needing to be replaced.
Have you had any work done to the car recently or made any modifications just before it stopped running?
Have you tried the spare key?
Like Steve says, can you hear the pump priming when you turn the ignition on?
#7: Re: engine turning but not fireing Author: Andy_Boo, Posted: Sat May 18, 2013 1:53 pm ---- today after checking everything mechanically I decided to start with the dreaded electrics (which I don't really like) and found the crank sensor to be faulty ordered a new 1 for £17.50 cheers for the fast responses
#8: Re: engine turning but not fireing Author: Andy_Boo, Posted: Thu Jun 06, 2013 2:39 pm ---- the cars still not running ive replaced the the sensor ive got eco mod on the dash and the engine management light on
#9: Re: engine turning but not fireing Author: MrBSI, Location: What's it to you? ? ?Posted: Thu Jun 06, 2013 2:58 pm ----
Andy_Boo wrote:
the cars still not running ive replaced the the sensor ive got eco mod on the dash and the engine management light on
Get it recovered to your local Peugeot main dealer.
Why do I get the feeling we only have half the story
Have you been dicking around with the electrical system?
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [180]:
Visitors: 179
Members: 0
Staff Online Now:
Page Views:
General
