#1: shell's 206 gt number 1010 comp car re-build. Author: shell-vt, Location: durhamPosted: Mon Jul 08, 2013 10:33 am ---- Hi everyone as some may remember ive had a few pugs now, But spotted was number 1010 gt with private plate p20 sgt so i had to have it, it looked very clean tidy for its year 1999-2000, But after a while the rear beam needed sorting so that was done,Then new front springs and dampers track rod ends ect..
Also fitted was new rear bumper,omp wheel boss, & 180 alloys and mirrors,few other little bits, then i sold it and was regretting it so after weeks of searching for it it was found on ebay yes.
Well i got 1010 back but she has been chaved up alittle and needs a bit t,l,c..
Today after much thort what to do with 1010 its getting a few structure modifications from cleveland car conversions and a slow re-build..
for comp use,.
Things were doing before it goes for its cage..
.1 remove all interior and dash.
2. remove heater matrix
3. remove all wires and pipes not needed
4 remove all brackets and other metals not needed.
few pictures of 1010 then and now..
Last edited by shell-vt on Wed Jul 17, 2013 8:13 am; edited 2 times in total
#3: Re: shell's 206 gt 1010 Author: shell-vt, Location: durhamPosted: Mon Jul 08, 2013 10:50 am ---- NEXT STEP my 206 gt is going to cleveland car conversions for a full weld in cage, then re-paint the inside all white,
Dash is getting flocked and my windows will be comming from AWC MOTORSPORTS PLASTICS, and im on talking to a motorsport company in darlington from whom im wanting doors, tailgate, wings, bonnet all doing.
thanks for looking..
#4: Re: shell's 206 gt 1010 Author: Nic_206, Location: cleaning the carPosted: Mon Jul 08, 2013 11:56 am ---- Looks good so far mate looking forward to the updates, should be good with the cage Gary's work is top quality
#5: Re: shell's 206 gt 1010 Author: usher, Location: northallertonPosted: Mon Jul 08, 2013 3:04 pm ---- I thought this was a run around for you
It was but i sold it, then regreted it and the new owner was not interested in selling untill last week, were as i purchesed it again..
#7: Re: shell's 206 gt 1010 Author: MattyP, Location: PlymouthPosted: Wed Jul 10, 2013 5:46 am ---- Glad to see you got it back, i felt the same as you when i sold my moonstone gti and wanted to buy it back when it too was on ebay, liking what you've done to it, think the 180 wheels suit it better than those nimrods
#8: Re: shell's 206 gt 1010 Author: shell-vt, Location: durhamPosted: Sun Jul 14, 2013 5:59 pm ---- Some progress from earlier today weight reduction..
The dash will go back in on a later date, but im getting it flocked, (black), next job is the wires..
#9: Re: shell's 206 gt 1010 Author: usher, Location: northallertonPosted: Mon Jul 15, 2013 12:42 am ---- Have fun with them there wrapped round each other like spaghetti works. I've managed to remove 2carrier bags so far pics on my project thred later today
#10: Re: shell's 206 gt 1010 Author: shell-vt, Location: durhamPosted: Mon Jul 15, 2013 4:34 am ---- yer wires are a night mare , we've done it before it just takes forever, same as that stuff with the rubber backing around the heater matrix ....
Well we got every last bit of the underlay out earlier, removed the heater matrix as well,Not sure if it will go in again, I think owen was going to get a blank for the heater pipes so its all blanked off..
Anyway few pics .. and anyone know what this is ?
before heater was removed..
heater removed looking tidy, so pleased there is no rust around the wheel arch seals...
180 wheels back on so i can sell the others off asap..
So much left to do its going to be a slow build i think, once cage and dash are back in i can get the interior re-painted, then put the poli windows in all round, Or i did'not mention im looking for a carbon roof, fibreglass doors, rear hatch, & bonnet will also be fitted.
The battery, brake lines ect will also be re-fitted inside the car once it's re-painted.
#12: Re: shell's 206 gt number 1010 comp car re-build. Author: HDI90, Location: sunny stokePosted: Wed Jul 17, 2013 5:35 pm ---- This car used to be in stafford, used to see it daily
#13: Re: shell's 206 gt number 1010 comp car re-build. Author: shell-vt, Location: durhamPosted: Thu Jul 18, 2013 6:18 am ---- ive had it for nearly 14mths or so, garage before me had it 18mths, last owner was local and had it a few years so how long ago would this of been please ??
#14: Re: shell's 206 gt number 1010 comp car re-build. Author: Cabrioman, Location: Neath - South WalesPosted: Thu Jul 18, 2013 9:17 am ---- Anyway few pics .. and anyone know what this is ?
Looks like a GPS tracking unit.
#15: Re: shell's 206 gt number 1010 comp car re-build. Author: shell-vt, Location: durhamPosted: Fri Jul 19, 2013 9:37 am ---- cheers,
#16: Re: shell's 206 gt number 1010 comp car re-build. Author: Nic_206, Location: cleaning the carPosted: Mon Jul 22, 2013 3:58 pm ---- Fancy selling the matrix mate?
#17: Re: shell's 206 gt number 1010 comp car re-build. Author: shell-vt, Location: durhamPosted: Tue Jul 23, 2013 3:26 pm ---- yer were you from
#18: Re: shell's 206 gt number 1010 comp car re-build. Author: shell-vt, Location: durhamPosted: Tue Jul 30, 2013 9:32 am ---- how 1010 is looking at the moment before it goes for its cage fitment, All unwanted brackets will have been removed by then also
Also looking at a sach shift this one is for a 106gti but hopefully it should fit the 206 aswell..
2005-08 250 kx is for sale
my daily
#19: Re: shell's 206 gt number 1010 comp car re-build. Author: usher, Location: northallertonPosted: Tue Jul 30, 2013 2:07 pm ---- why has it been taped up??
have you got the cage fitted yet and did you check out WRC
#20: Re: shell's 206 gt number 1010 comp car re-build. Author: shell-vt, Location: durhamPosted: Mon Aug 12, 2013 3:34 pm ---- its taped to protect paint work buddy, gary is doing cage around20th
#21: Re: shell's 206 gt number 1010 comp car re-build. Author: shell-vt, Location: durhamPosted: Tue Aug 20, 2013 5:58 am ---- 1010 is now at ccc cleveland car conversions (gary stone)
#22: Re: shell's 206 gt number 1010 comp car re-build. Author: Diabloreddan, Posted: Thu Sep 05, 2013 6:47 pm ---- Looks good matey
#23: Re: shell's 206 gt number 1010 comp car re-build. Author: shell-vt, Location: durhamPosted: Fri Jun 20, 2014 10:21 am ---- well 1010 is still going she is still getting the roll cage fitted, (about time)so when it comes back it maybe off again sometime for the next step getting it running again (rather new engine ect or re-do the orig- one ..
few pics of her as so looks now..
#24: Re: shell's 206 gt number 1010 comp car re-build. Author: JamieM, Posted: Fri Jun 20, 2014 11:05 am ---- Be interesting to see if the Sachshift fits always wondered on p but... I have a 180 so probably wouldn't work or id have one!
Nice
#25: Re: shell's 206 gt number 1010 comp car re-build. Author: usher, Location: northallertonPosted: Fri Jun 20, 2014 4:53 pm ---- is that welded to the floor or still to be done??
how come you didnt go to the dash with the cage
looking good glad to hear some progres
#26: Re: shell's 206 gt number 1010 comp car re-build. Author: shell-vt, Location: durhamPosted: Sat Jun 21, 2014 1:50 am ---- still work to be done its just a start after waiting a year.
#27: Re: shell's 206 gt number 1010 comp car re-build. Author: shell-vt, Location: durhamPosted: Wed Oct 15, 2014 5:52 am ---- number 1010 is finally back cage is complete all welded in, just need to remove all the tape which will be a nightmere as its been on so long polish the body back up tape the in side and re-paint the cage.
#28: Re: shell's 206 gt number 1010 comp car re-build. Author: AWK-53, Location: OxfordshirePosted: Thu Oct 16, 2014 4:02 pm ---- Good news, pics?
#29: Re: shell's 206 gt number 1010 comp car re-build. Author: shell-vt, Location: durhamPosted: Fri Oct 17, 2014 5:18 am ---- pics to follow soon satch will not fit, new plan cars going back to gary stones for a new engine ect so when it comes back it,ll be different car yet again, im just waiting to get it took back down once gary has settled and sorted were he,s doing it as he looking for new premises. So 1010 will be a 3.0 v6 next time i see it ..
#30: Re: shell's 206 gt number 1010 comp car re-build. Author: AWK-53, Location: OxfordshirePosted: Fri Oct 17, 2014 12:50 pm ---- 3.0 V6 - Nice!
#31: Re: shell's 206 gt number 1010 comp car re-build. Author: Steve137, Location: BasingstokePosted: Wed Oct 29, 2014 12:47 pm ---- any luck with the sach shift?
#32: Re: shell's 206 gt number 1010 comp car re-build. Author: shell-vt, Location: durhamPosted: Fri Oct 31, 2014 2:13 pm ---- no im going to see gary stone about it when he does my engine conversion
#33: Re: shell's 206 gt number 1010 comp car re-build. Author: Steve137, Location: BasingstokePosted: Thu Mar 12, 2015 2:36 pm ---- did you manage to get the sach shifter to fit??
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17132
Online Now [623]:
Visitors: 622
Members: 0
Staff Online Now:
Page Views:
General
looking forward to the updates, should be good with the cage Gary's work is top quality
