#1: seanbrown121's HDi DTurbo! Author: seanbrown121, Location: WrexhamPosted: Sun Aug 18, 2013 5:30 pm ---- Ok, so i might aswell get myself a progress thread!
Bought my car about 2 weeks ago from sheffield i straight swapped it with my pride and joy, but running costs were too high for me so i had to get
this is my new one which i bought completely standard and i didnt take any pics of it when i first bought it, but it just looked the same as all the others, you know higher than a landrover haha
Modifications so far:
Colourcoded bonnet vent, front badge and door handles
Gold calipers and drums
Boost Gauge fitted in the heater vent
Wind deflectors
I.C.E (Headunit, 15" kicker solobaric subwoofer)
LED sidelights
LED Foglights
6000k HID conversion Kit
Lowered on the back as far as it can go before it scrubs
60mm Apex springs on the front
DIY rear arches rolled with a wooden pole
heres some pics hope you like them
Future plans
Ph2 boot strip
Tinted rear windows
coilovers
Pressed plates
Led Boost gauge (as i cant see this one at night(
M3 style rear lights
Spray the inside of my headlights china blue
Sp Lower grill
180 interior
decat and egr blank off
406 boostpipes and intercooler
Boost controller
2.2 Mechanical Fuel pump
1.6 Fuel pressure sensor
Stage 2 Remap
Stay Tuned
#2: Re: seanbrown121's HDi DTurbo! Author: seanbrown121, Location: WrexhamPosted: Sun Aug 18, 2013 5:38 pm ---- Oh and BTW it got washed about 2 hours after taking the pictures!
Should of washed it first tbh ?
#3: Re: seanbrown121's HDi DTurbo! Author: magistar, Location: new zealandPosted: Sun Aug 18, 2013 5:58 pm ---- not bad looks like you may want to get the flaking paint sorted though as it looks like rust is developing. would be keen to see how the HID looks with the standard light housing. always thought HID's needed to be in projector lamps to stop it from dazzling
Also what proton were you driving before? Can't access your link without registering.
#4: Re: seanbrown121's HDi DTurbo! Author: Steve206, Location: UKPosted: Sun Aug 18, 2013 7:08 pm ---- I wouldn't be modifying with the body work in that condition, no offence.
#5: Re: seanbrown121's HDi DTurbo! Author: seanbrown121, Location: WrexhamPosted: Mon Aug 19, 2013 8:39 am ---- Proton satria will upload a few pics on here when I get home from work
#6: Re: seanbrown121's HDi DTurbo! Author: ARRAN, Location: WiltshirePosted: Mon Aug 19, 2013 11:25 am ---- Couldl've gone lower
i think i have the wider nimrods because the arches sit on my tyres and you can see where they have worn, !
but i got a rolling pin, jacked the car onto it and rolled my arches! haha and it worked!
#8: Re: seanbrown121's HDi DTurbo! Author: Steve206, Location: UKPosted: Mon Aug 19, 2013 4:04 pm ---- What wider nimrods? The 206 ones are 6.5j, which got easily under the arches.
What wider nimrods? The 206 ones are 6.5j, which got easily under the arches.
406 nimrods have a lower offset meaning they stick out further think thats what he means
#10: Re: seanbrown121's HDi DTurbo! Author: 2Oh!6, Location: GloucesterPosted: Mon Aug 19, 2013 5:02 pm ---- Looks like abit of a shed tbh.
#11: Re: seanbrown121's HDi DTurbo! Author: tsotd, Location: kentPosted: Tue Aug 20, 2013 6:13 am ----
2Oh!6 wrote:
Looks like abit of a shed tbh.
abit harsh
#12: Re: seanbrown121's HDi DTurbo! Author: jk206, Location: GainsboroughPosted: Tue Aug 20, 2013 10:33 am ---- personally id sort out the body work first, then focus on doing mods as the rust will only get worse
#13: Re: seanbrown121's HDi DTurbo! Author: 2Oh!6, Location: GloucesterPosted: Tue Aug 20, 2013 11:48 am ----
tsotd wrote:
2Oh!6 wrote:
Looks like abit of a shed tbh.
abit harsh
Not really, looks like every single panel is practically dented or rusted.
#14: Re: seanbrown121's HDi DTurbo! Author: seanbrown121, Location: WrexhamPosted: Tue Aug 20, 2013 12:47 pm ---- My old car! Proton Satria Sport
The one on the right
Then the engine blew up so it was replaced, some pics of the blew engine
as you can possibly tell this car isnt my pride and joy, it is just a midpoint between a nicer car, i have bought it to save fuel, tax and insurance, and for 500 quid (what he advertised it at) i think its a bargain!
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [292]:
Visitors: 292
Members: 0
Staff Online Now:
Page Views:
General
abit harsh
