I was trying to read the ECU of my 206 2.0 Hdi using the software.
The plan was to buy a stage 2 map from pro_steve When i click the read ecu button i get error -1 and the ecu read fails.
Hope someone has some ideas on this i have tried several times and get the same error every time.
#2: Re: Galletto 1260 not reading 2.0Hdi ECU Author: Steve206, Location: UKPosted: Thu Oct 10, 2013 3:10 pm ---- Checked your ecu number?
#3: Re: Galletto 1260 not reading 2.0Hdi ECU Author: macca1411, Location: Westhoughton, LancashirePosted: Thu Oct 10, 2013 4:28 pm ---- Diesels only became EOBD compliant in 2004. If your car is pre 2004, then the protocols may not work with the software that you have.
#4: Re: Galletto 1260 not reading 2.0Hdi ECU Author: samd864, Posted: Thu Oct 10, 2013 4:49 pm ---- Mine is an 04 plate, is there any software that you can recommend that I use? Thanks.
#5: Re: Galletto 1260 not reading 2.0Hdi ECU Author: macca1411, Location: Westhoughton, LancashirePosted: Thu Oct 10, 2013 5:04 pm ---- I use the Elm327 and Palmer Performance software. Used it on a 2000 diesel with no problems.
Somewhere I have a diagram of which pins should be connected for ISO VPW or PWM. You may be able to change the settings in the software. I'll dig it out tomorrow and post it up.
#6: Re: Galletto 1260 not reading 2.0Hdi ECU Author: cartoonhead, Location: North ManchesterPosted: Thu Oct 10, 2013 6:54 pm ---- did you install the drivers for the lead ?
#7: Re: Galletto 1260 not reading 2.0Hdi ECU Author: samd864, Posted: Fri Oct 11, 2013 3:35 am ---- It seemed to install the drivers on its own and appeared as a com4 port on my windows 8 laptop. will try with xp later.
#8: Re: Galletto 1260 not reading 2.0Hdi ECU Author: Steve206, Location: UKPosted: Fri Oct 11, 2013 3:38 am ---- Have you got the ignition on?
#9: Re: Galletto 1260 not reading 2.0Hdi ECU Author: samd864, Posted: Fri Oct 11, 2013 5:57 am ---- I plug the cable in launch the software and then turn on the ignition.
#10: Re: Galletto 1260 not reading 2.0Hdi ECU Author: Steve206, Location: UKPosted: Fri Oct 11, 2013 8:10 am ---- I would plug it in and then turn ignition on.
#11: Re: Galletto 1260 not reading 2.0Hdi ECU Author: macca1411, Location: Westhoughton, LancashirePosted: Fri Oct 11, 2013 9:05 am ----
Check in the software settings to make sure that your protocol is set for ISO. It may be different with a programming lead, but worth a try.
I would have thought it would adjust automatically for the vehicle it is connected to, but not having used the software, I couldn't tell you.
I'd also try it on XP as the advert says
Quote::
This tool also requires Windows XP 32bit or earlier - while it may work, we do not support it on Vista or Windows 7 or on any 64bit operating systems.
So at a guess it won't work on Windows 8
#12: Re: Galletto 1260 not reading 2.0Hdi ECU Author: rlees85, Location: DaventryPosted: Mon Oct 14, 2013 9:09 am ---- I'm sure I read somewhere Galetto requires Windows XP. If you have access to an XP laptop give that a go first. I am guessing you have the EDC15C2 ECU? If so all should work...
If your local to Macclesfield (long shot I know haha) your welcome to have a go with my KWP2000 that I use to read/write my 2.0 with
#13: Re: Galletto 1260 not reading 2.0Hdi ECU Author: gpvecchi, Location: ItalyPosted: Mon Oct 14, 2013 9:39 am ---- May someone share latest Galletto 1260 drivers?
#14: Re: Galletto 1260 not reading 2.0Hdi ECU Author: samd864, Posted: Mon Oct 14, 2013 1:13 pm ----
rlees85 wrote:
I'm sure I read somewhere Galetto requires Windows XP. If you have access to an XP laptop give that a go first. I am guessing you have the EDC15C2 ECU? If so all should work...
If your local to Macclesfield (long shot I know haha) your welcome to have a go with my KWP2000 that I use to read/write my 2.0 with
Only about 120miles away I have got it to run on my XP laptop. Thanks for the offer anyhow.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [162]:
Visitors: 161
Members: 0
Staff Online Now:
Page Views:
General
I have got it to run on my XP laptop. Thanks for the offer anyhow.
