#1: Removing BSI... Author: sheerness, Posted: Sun Oct 20, 2013 9:16 am ---- Hi 206 Friends,
I Have been having problems with my car for 2 weeks now, (please see other posts)
I Have Ordered a BSI & ECU i can take out the ECU no problem, but needing some advise on removing the BSI, i have looked on you tube but all that is there is for a 306 so its installed different to my 206, does anyone here know where i can go and see a video or some advice on removing BSI, I Dont Fancy Taking the whole dashboard out again,
any advice on this would be FAB
thanks in advance friend's
Dom.....
#2: Re: Removing BSI... Author: Addaz, Location: SuffolkPosted: Sun Oct 20, 2013 11:00 am ---- What year? And new or second hand?
#3: Re: Removing BSI... Author: Addaz, Location: SuffolkPosted: Sun Oct 20, 2013 11:05 am ---- Posted a reply in your other thread, there is no need at all for a bsi or ecu by any means
#4: Re: Removing BSI... Author: sheerness, Posted: Sun Oct 20, 2013 11:23 am ---- Hi there thanks for your reply,
My Car Is a W Reg 2000 I Will be replacing both ECU & BSI,
The other ECU/BSI Is from a V Reg car,
Also does anyone out there know if I can get the "DAM" number from the donor car that is no longer around, I know the reg and the vin numbers but needing to know the dam number so I can use the diagnostic equipment,
again thanks for taking the time is reading my posts and helping me,
Kind Regards
Dom.....
#5: Re: Removing BSI... Author: Addaz, Location: SuffolkPosted: Sun Oct 20, 2013 11:33 am ---- Why? I dont understand the replacement?
9999 will be substantial for the build code.
#6: Re: Removing BSI... Author: sheerness, Posted: Sun Oct 20, 2013 11:45 am ---- Thanks for that,
the reason I am replacing BCI/ECU is because my alternator had died then the whole car died on the M25, AA Come out car would not start again, also a solid Engine management light Is on, I have replaced ECU Relay and all fuses, put in new coil pack replaced sensors ect ect, still got the same problem, the only thing left is the ECU/BSI, PP2000 can not get the ecu to reply anymore so ordered another which will be here Tuesday,
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [47]:
Visitors: 46
Members: 0
Staff Online Now:
Page Views:
General
