#1: Possible broken button Author: astra_aurelis, Location: NorwichPosted: Wed Jan 22, 2014 11:11 am ---- Does anyone know how to work out if the button on the windscreen wiper stalk is broken?!
I'm trying to change the display unit to show how many miles I have left in my tank. I kindly jump started a car, it reset my battery and now this info isn't showing on the display.
#2: Re: Possible broken button Author: macca1411, Location: Westhoughton, LancashirePosted: Wed Jan 22, 2014 12:13 pm ---- Not sure if you can pop it off with a small screw driver and then use a cocktail stick to see if the switch is working.
Have you tried doing a soft boot on the BSI? Beginners guide
#3: Re: Possible broken button Author: astra_aurelis, Location: NorwichPosted: Wed Jan 22, 2014 4:43 pm ---- Yeah I tried that earlier but it didn't seem to make a difference. I will try that but I don't want to break anything!!!
#4: Re: Possible broken button Author: commandosqueak, Location: Lower SlaughterPosted: Thu Jan 23, 2014 3:49 am ---- i didnt think you could jump a 206 cause of the bsi system? all i can suggest is a soft reboot
#5: Re: Possible broken button Author: astra_aurelis, Location: NorwichPosted: Thu Jan 23, 2014 4:54 am ---- You can jump start a car with another which has a bsi system, you just have to be a bit careful how you do it.
#6: Re: Possible broken button Author: astra_aurelis, Location: NorwichPosted: Fri Jan 24, 2014 10:54 am ---- So I managed to fix it. I just took the end off the button, used a small screw driver to clean it out and removed some weird orange stuff from it, put the button back on and IT WORKS!!
#7: Re: Possible broken button Author: macca1411, Location: Westhoughton, LancashirePosted: Fri Jan 24, 2014 11:15 am ----
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy