#31: Re: Not a 206... Author: Addaz, Location: SuffolkPosted: Sun May 09, 2010 3:36 pm ----
EdCherry wrote:
Rust on a pug unlucky? Not really they all rust.
Pudding stirrer for a gearstick? not likely, no play in it on anything ive engineered on it, gearbox side however there is play currently but then again you'd expect that on a 24 year old gearbox which looks pretty darn knackered
Actually mate, i have personally found that they dont rust like yours
Yes they have the occasional scab here and there, but heck what car doesnt
And by pudding stirrer, i dont mean the play, i mean the shear size of it, and how far you have to go forward and backwards to get into gear
#32: Re: Not a 206... Author: EdCherry, Location: WiltshirePosted: Sun May 09, 2010 3:42 pm ---- This car wasn't badly rusted, but rather do a half assed bodged repair like many we went all out.
From 3rd to 4th there is about 120-130mm, I didn't just stick a long shaft on there.
#33: Re: Patchy Project Author: EdCherry, Location: WiltshirePosted: Mon May 10, 2010 9:23 am ---- Rear beam will be off tomorrow again ready for the underseal and for the new mounting bush' to go on.
Subframe will be off tomorrow so we can clean it wednesday.
Windscreen and cage back in for wednesday too, and hopefully from friday onwards its moving back towards get all the mechnical bits back on the car.
#34: Re: Patchy Project Author: EdCherry, Location: WiltshirePosted: Thu May 13, 2010 5:14 pm ---- This is how it looks as of today.
Rear screen bonded back in, front screen with top tint on (although think I will need a bit bigger than a 2.5 inch tint!) and rear fixed windows in.
Cage went in yesterday, just need to shorten one or two bolts to neaten things up and finish the rear spreaders underneath.
#35: Re: Patchy Project Author: EdCherry, Location: WiltshirePosted: Wed Jun 30, 2010 5:11 pm ---- Long time since an update due to finishing my degree and racing.
So here we go!
Before I got really busy
24th May
Quick Steam clean and rebuild of the rack.
Yesterday and Today
Finally did the underseal, 4 wheels bolted back on with the running gear.
]
#36: Re: Patchy Project Author: CD-B3, Location: Salisbury / New ForestPosted: Thu Jul 01, 2010 2:23 am ---- You typed in the wrong codes (again) Ed
#37: Re: Patchy Project Author: EdCherry, Location: WiltshirePosted: Thu Jul 01, 2010 3:09 pm ---- Copied from another website, f*** writing it all out again.
#38: Re: Patchy Project Author: bertt, Location: chesterPosted: Sun Aug 01, 2010 7:58 am ---- good progress thread mate love the old 205s!
#39: Re: Patchy Project Author: EdCherry, Location: WiltshirePosted: Tue Aug 03, 2010 3:57 pm ---- Been a fair bit busy with silly wacing cars, crashing and blowing engines up and stuff. Finally got some bits done, bolted on and it feels like progress.
#40: Re: Patchy Project Author: CD-B3, Location: Salisbury / New ForestPosted: Tue Aug 03, 2010 4:00 pm ---- Did you sort out the brake line to the bias in the end?
They all pretty much fitted now?
#41: Re: Patchy Project Author: EdCherry, Location: WiltshirePosted: Tue Aug 03, 2010 4:03 pm ---- Front Right needs some clips before I finish bending it into position.
Bias all fitted, need to make some more brake lines thursday for the rear beam and then everything is done.
#42: Re: Patchy Project Author: spud_owen, Location: ashby de la zouchPosted: Fri Aug 06, 2010 6:38 am ---- looks mint!
#43: Re: Patchy Project Author: EdCherry, Location: WiltshirePosted: Fri Aug 06, 2010 11:37 am ---- Right well as I said took the brakes off Fudge who is looking a bit sorry for himself stored away for so long.
Anyway got over to the workshop to fit them, been supplied base model fitting kits twice now for them, proper kit should be with me monday.
Then I got on with flaring some more brake lines and shaping them up a bit
Today I was going to put the engine, gearbox and driveshafts back in but after clearing the mess of a workshop up slightly decided I would go drinking earlier so came home.
#44: Re: Patchy Project Author: Dillon, Location: KentPosted: Fri Aug 06, 2010 12:06 pm ---- Looking good Ed
#45: Re: Patchy Project Author: Antix, Location: WorcesterPosted: Fri Aug 06, 2010 12:48 pm ---- great read Ed!
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [297]:
Visitors: 296
Members: 0
Staff Online Now:
Page Views:
General
