#1: Indicator position Author: QuArTz, Location: South CoastPosted: Wed Mar 19, 2014 4:03 pm ---- Hi
I want to reposition the indicator.
Is there any law or regulation which states where the side indicator can be positioned?
Thanks
#2: Re: Indicator position Author: Hawkers, Location: Norwich, United KingdomPosted: Wed Mar 19, 2014 4:43 pm ---- This could fail it on MOT. A selector switch missing, insecure, faulty, or not able to be operated from the normal driving position.
#3: Re: Indicator position Author: QuArTz, Location: South CoastPosted: Wed Mar 19, 2014 5:21 pm ---- Sorry..
I want to move the side repeater bulb.
#4: Re: Indicator position Author: macca1411, Location: Westhoughton, LancashirePosted: Thu Mar 20, 2014 3:19 am ---- No more than 2.6 meters from the front of the vehicle (no problem on a 206) and within 40cm from the side.
It must be visible from the rear at a minimum angle of 5 degrees to at least 60 degrees. It should be within 1.5 meters of the ground. If over 75 cm from the ground then it should be visible 15 degrees above and below the horizontal, if lower than 75 cm then visible from 15 degrees above and 5 degrees below the horizontal.
It must be amber in colour, can be of any size and intensity if it is 'e' marked. If not 'e' marked then it must be visible from a reasonable distance.
Simple really. Where were you thinking about putting it?
#5: Re: Indicator position Author: jbhoy90, Location: GlasgowPosted: Thu Mar 20, 2014 5:15 am ---- bit of a hassle, a mate of mine done it and failed his next mot, though as macca has said keep them within those ranges etc and you should be fine.
out of interest are those kahn alloys you have on?
#6: Re: Indicator position Author: QuArTz, Location: South CoastPosted: Thu Mar 20, 2014 2:17 pm ---- Cheers for the info guys.
I will post up a photo to show the intended area I want to move it to, any input with this would be great.
#7: Re: Indicator position Author: QuArTz, Location: South CoastPosted: Thu Mar 20, 2014 2:19 pm ----
jbhoy90 wrote:
Out of interest are those kahn alloys you have on?
That's my first 206 and yeah, they're 17" Kahn's
#8: Re: Indicator position Author: jbhoy90, Location: GlasgowPosted: Thu Mar 20, 2014 3:33 pm ---- Thought so, same as mine just couldnt see them very well on my mobile, good to see another 206 with them.
#9: Re: Indicator position Author: jbhoy90, Location: GlasgowPosted: Thu Mar 20, 2014 3:36 pm ---- Not everones cup of tea but i like the wing mirrors with them, my mate removed his indicators and fitted a set and it looks pretty good
#10: Re: Indicator position Author: QuArTz, Location: South CoastPosted: Fri Mar 21, 2014 3:16 pm ----
jbhoy90 wrote:
Not everones cup of tea but i like the wing mirrors with them, my mate removed his indicators and fitted a set and it looks pretty good
I am considering modifying a pair of OEM wing mirrors by adding an amber strip of l.e.d's but I'm still not sure if they will look any better than the ones Ive seen for sale online.
#11: Re: Indicator position Author: jbhoy90, Location: GlasgowPosted: Fri Mar 21, 2014 3:22 pm ---- Hard to say, if done right it could look good, if done wrong could look very tacky, if your thinking of it grab a set from the scrappy and experiment, most youv got to kose that way iaround 15 quid, and you might make 10 of that back if you dont like them and can sell them on
Not sure how they would affect an mot though if you remove the original ones, my nates not had his mot since the change
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [191]:
Visitors: 190
Members: 0
Staff Online Now:
Page Views:
General
just couldnt see them very well on my mobile, good to see another 206 with them.
