New Here?
Toggle Content
   

Toggle Content User Info
Welcome

Anonymous
Nickname
Password
Register
Membership:
Latest: Beduff1977
New Today: 0
New Yesterday: 0
Overall: 17134
Online Now [679]:
Visitors: 678
Bots: 1
Members: 0
Staff Online Now:

No staff members are online!
Page Views:
Today: 178716
Total: 107580329

Toggle Content Main Menu
 General Info Goodies Search Web Stats Members
 Donations

 

Forums ›

:: Forums ›
Electric Window Problem.
-> 206 Problems
#1: Electric Window Problem. Author: buseng,  PostPosted: Sun Jun 22, 2014 6:04 am
    ----
I have a 55plate 206 SE, 1.4 Petrol 8V, 5dr hatchback.
For a while I have had my rear electric windows isolated on the dash switch.
However during this hot weather I have decided to use them & turned them on. At first they both worked but after a short while the O/S/R stopped working, it stopped once & started again but now has stopped altogether. Luckily it is almost in the fully closed position. When you operate the switch you cannot hear any clicking unlike the other ones.
Could it be a relay? Also does anyone know where the rear window relays are on this car? I have found them on servicebox but the positions aren't clear. I hope it isn't the actual regulator itself.
Thanks in advance.
#2: Re: Electric Window Problem. Author: macca1411, Location: Westhoughton, Lancashire PostPosted: Sun Jun 22, 2014 6:17 am
    ----
If ones working and one isn't then I think you could disregard the relay.
I'd be more inclined to look at the switch, motor and wiring for the O/S/R
#3: Re: Electric Window Problem. Author: MrBSI, Location: What's it to you? ? ? PostPosted: Sun Jun 22, 2014 6:21 am
    ----
Give both switches for the window in question a good prodding, if one switch is faulty it will stop the window working due to the way the circuit is wired.

Motor might be stuck through lack of use, take the door panel of & give the window motor a firm smack or 2 with a small hammer while operating the window switches.
#4: Re: Electric Window Problem. Author: buseng,  PostPosted: Sun Jun 22, 2014 3:11 pm
    ----
Thanks for the replies.
I may of sussed it, I unplugged the door loom from the centre pillar & plugged it back in giving it a wiggle. It seemed to work after that. I also gave the pins a quick spray with brake cleaner & WD40.
Will keep an eye on it.
-> 206 Problems


Page 1 of 1
 
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL, Code Credits, Privacy Policy