#1: Rear axle rubber bushes Author: DREWDEN, Location: huddersfieldPosted: Thu Jun 26, 2014 5:04 pm ---- Rear axle fitted yesterday (scrappers) so going to refurbish the old one, and keep as a spare.
Has anyone replaced the rubber bushes, and do you need a press etc.
Cheers
#2: Re: Rear axle rubber bushes Author: PezHdi, Location: ShrewsburyPosted: Fri Jun 27, 2014 1:30 am ---- Yes iv done mine.
I replaced them with polyurethane bushes.
The old ones where shot so come out pretty easy but the new ones needed a press, block of 2x4 and a decent lump hammer.
#3: Re: Rear axle rubber bushes Author: DREWDEN, Location: huddersfieldPosted: Fri Jun 27, 2014 5:15 am ----
PezHdi wrote:
Yes iv done mine.
I replaced them with polyurethane bushes.
The old ones where shot so come out pretty easy but the new ones needed a press, block of 2x4 and a decent lump hammer.
Cheers, The two going to the front of the car look shot, the rear ones seem ok, where did you get them from.
#4: Re: Rear axle rubber bushes Author: gazza82, Location: South BucksPosted: Fri Jun 27, 2014 2:45 pm ---- Powerflex probably ... Superflex don't seen to do the axle bushes but do others.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy