#1: Washer Jets are shocking Author: 206Mark007, Posted: Fri Sep 26, 2014 12:03 pm ---- Any ideas how i can make the front washer jets work better? They hardly fire any fluid out of them and ive been told its a common problem
#2: Re: Washer Jets are shocking Author: Triggerfish, Posted: Fri Sep 26, 2014 1:04 pm ---- Usually they are blocked at the nozzle/outlets. You can use a long pin and poke into the nozzle/outlets to clear it. Slide it in and out and it will be cleared.
Check under the bonnet too to see if there are any blockages within the actual clear fluid pipes that leads to the nozzles/outlets. If so, detach pipe from nozzle/outlets to clean inside the pipes.
Check under the bonnet too to see if there are any blockages within the actual clear fluid pipes that leads to the nozzles/outlets. If so, detach pipe from nozzle/outlets to clean inside the pipes.
If you with the nozzles detached still have poor flow, follow the line back towards the reservoir and check that it isn't kinked.
Is your rear washer also underperforming?. There could be gunk at the bottom of the reservoir [partly ] blocking flow into the pump.
#4: Re: Washer Jets are shocking Author: gazza82, Location: South BucksPosted: Fri Sep 26, 2014 6:22 pm ---- Fit the newer spray type ... Much better.
#5: Re: Washer Jets are shocking Author: 206Mark007, Posted: Sat Sep 27, 2014 9:48 am ---- Cheers for info guys ill have a look into this
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [442]:
Visitors: 441
Members: 0
Staff Online Now:
Page Views:
General
