#1: Dose pipe on 206 Hdi? Author: MrWhite, Posted: Tue Dec 23, 2014 1:59 pm ---- Hi guys. So I have been looking into a dump valve for my 206 2.0 Hdi. But upon reading some threads on here from a few years ago that it is not a good idea due to power loss etc. which turn me onto a comment made about a does pipe. And from my understanding it's a pipe fitted in replacement of the air intake to the turbo and upon deceleration the pipe makes a fluttering chatter noise and I'm sorry not everyone will share my opinion but I really like it.
So my question is can this be fitted to my car 206 2.0 Hdi decat eager delete and stage 1 remap. Is it hard and is it expensive to do as I'm trying to google but I don't really know what I am looking for and would love any helpful advice if you guys know anything or could point me in the right direction
Also not been on my project thread for a while as mr farmer decided to pull out in front of me and f**ked my car. Only a week after a drum to disc conversion too.
Thanks in advance for any help guys I apriciate you taking your time to read and reply.
Nate Last edited by MrWhite on Mon Jan 12, 2015 8:30 am; edited 1 time in total
#2: Re: Does pipe on 206 Hdi? Author: Addaz, Location: SuffolkPosted: Tue Dec 23, 2014 4:34 pm ---- Im not sure you will experience power loss with a dump valve at all, you may loose 'some' cylinder filling but thats it
Just get a strong enough spring and you should be good to go!
#3: Re: Does pipe on 206 Hdi? Author: MrWhite, Posted: Thu Dec 25, 2014 5:06 am ---- could you recommend a good Dump valve that chatteres if my description makes any sense and have you had any dealings with a does pipe?
#4: Re: Does pipe on 206 Hdi? Author: Addaz, Location: SuffolkPosted: Thu Dec 25, 2014 10:59 am ---- You mean a does pipe? A short bit of tubing the same size of the intake of the turbo witha large air filter...
A dump valve relieves pressure, a new intake path just amplifies intake noise or compressor charge hitting the turbo
#5: Re: Does pipe on 206 Hdi? Author: MrWhite, Posted: Mon Jan 12, 2015 8:29 am ---- Addaz Could you recommend anyone up north that could Supply or just fit a Fmic and fabricate a does pipe for my 2.0 lump? I feel out of my depth here so my knowledge on this is a little thin
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17132
Online Now [303]:
Visitors: 302
Members: 0
Staff Online Now:
Page Views:
General
