#16: Re: My sw v6 project Author: pugsyhdi, Posted: Sun Jan 11, 2015 10:41 pm ----
Edward wrote:
And is it a 5 speed box on the V6?
Yes it is the standard V6 one
It would be like trying to put a 1.6 shaft in to a 2.0 box they don't fit
#17: Re: My sw v6 project Author: Edward, Location: In the garagePosted: Mon Jan 12, 2015 2:41 am ---- The 1.6 shafts and hubs aren't as big as GTI/diesel parts. Any shaft from a Be4 gearbox would have been a better start.
#18: Re: My sw v6 project Author: yeti86, Location: PolandPosted: Mon Jan 12, 2015 3:29 am ---- 1.6 16V has the same hubs as gti
#19: Re: My sw v6 project Author: pugsyhdi, Posted: Mon Jan 12, 2015 4:39 am ---- Some 1.6 would have same ends on it as a 2 litre but I would imagine the back mount in different position so would not fit as long one goes throw it
No BE shaft will fit as I say the diff/box ends are different also the distance from box to the back mount is different
I might managed to make one without welding but I though if I was welding one might as well do both as 3.0 shafts better
#20: Re: My sw v6 project Author: pugsyhdi, Posted: Mon Jan 12, 2015 9:04 am ---- one with more splines is v6 one totally different
bottom one v6
3 different inputs to 3 different boxes
#21: Re: My sw v6 project Author: Edward, Location: In the garagePosted: Mon Jan 12, 2015 9:11 am ---- Would a Be4 box fit the V6 ?
#22: Re: My sw v6 project Author: pugsyhdi, Posted: Mon Jan 12, 2015 9:18 am ---- No totally different and probably would not be as strong
#23: Re: My sw v6 project Author: Addaz, Location: SuffolkPosted: Mon Jan 12, 2015 9:40 am ---- You only running 200, shaft strength is a concern. I would personally be fitting the be/206 shaft ends to the 406 shafts/inputs
#24: Re: My sw v6 project Author: pugsyhdi, Posted: Mon Jan 12, 2015 10:52 am ---- As I say tried that still need cut so best to use strongest shaft also way I welded them I have no worry
#25: Re: My sw v6 project Author: omega, Location: nottinghamPosted: Mon Jan 12, 2015 3:32 pm ---- that drive shaft looks scarey to me
looks a nighitmare to wire up
good luck
#26: Re: My sw v6 project Author: Addaz, Location: SuffolkPosted: Mon Jan 12, 2015 5:10 pm ---- I ment to say NOT a concern, but still that welded shaft looks dodgy as!
Best of luck anyways though
#27: Re: My sw v6 project Author: DeadEyePaul, Location: Rugby,WarwickshirePosted: Tue Jan 13, 2015 3:49 am ---- Davemac might be able to fabricate you one? My driveshaft broke on my v6 and i sent them my old one. I got the d9 in mine www.gripperlsd.com/
#28: Re: My sw v6 project Author: pugsyhdi, Posted: Tue Jan 13, 2015 4:35 am ---- I'm not worried about it just looks bad in pic plus its nice and rusty. yes wiring is great fun need to run 2 ecus trying to get all under bonnet is to fun
#29: Re: My sw v6 project Author: pugsyhdi, Posted: Tue Jan 13, 2015 4:38 am ----
DeadEyePaul wrote:
Davemac might be able to fabricate you one? My driveshaft broke on my v6 and i sent them my old one. I got the d9 in mine www.gripperlsd.com/
If I find I do have a problem what ruff price I'm I looking at thanks
#30: Re: My sw v6 project Author: DeadEyePaul, Location: Rugby,WarwickshirePosted: Tue Jan 13, 2015 4:45 am ---- Irc £300
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [360]:
Visitors: 359
Members: 0
Staff Online Now:
Page Views:
General
