#1: front right wheel movement Author: Project2062014, Location: CornwallPosted: Thu Apr 16, 2015 1:42 pm ---- I've had a slight squeeks at random times . ive removed the front wheel to change the bearing and I've noticed --
The other side looks like this
How is so much play possible? I cannot even find any play .. Last edited by Project2062014 on Thu Apr 16, 2015 3:44 pm; edited 1 time in total
#2: Re: front right wheel movement Author: Project2062014, Location: CornwallPosted: Thu Apr 16, 2015 3:16 pm ---- Will a hub off a 1.9d 1999 Fit ?
I cannot remove the bearing with a puller kit . But I've got a 1999 206 on the drive .. Anyone many thanks
#3: Re: front right wheel movement Author: HowlingMadMurdock, Location: Ashington, NorthumberlandPosted: Thu Apr 16, 2015 3:20 pm ---- I would go to the local scrap yard or eBay and buy a hub assembly from the exact model. It will be cheap and guaranteed to fit
#4: Re: front right wheel movement Author: macca1411, Location: Westhoughton, LancashirePosted: Thu Apr 16, 2015 3:35 pm ---- What wheels are you running on?
Is the tyre the right size?
#5: Re: front right wheel movement Author: Project2062014, Location: CornwallPosted: Thu Apr 16, 2015 3:42 pm ----
macca1411 wrote:
What wheels are you running on?
Is the tyre the right size?
There all 17/40/205 rollin on the original vortex 17's .
#6: Re: front right wheel movement Author: HowlingMadMurdock, Location: Ashington, NorthumberlandPosted: Thu Apr 16, 2015 4:57 pm ---- Have you had it lowered? Something is hitting that shock and it shouldn't.
Any tyre damage? I would have thought so.
Springs and shocks ok?
I would have thought you would hear noise with that damage to the shock
#7: Re: front right wheel movement Author: Project2062014, Location: CornwallPosted: Fri Apr 17, 2015 3:33 pm ---- So I replaced the bearing today . I found the right damper was sat 5mm further down than the left damper in the hub.
There is a small location plate welded on each damper by pro sport to sit in the hub .. The right hub has a slight dink on each side at the back of the hub where ithe location plate sits in .
so the damper sits 5mm lower because of the dink .
I can say then hub must of been in a smash UP @some point ..
I spot welded it and grinded it back perfect .
Car now sits perfect to the other side ..
I didnt notice before DOH !
#8: Re: front right wheel movement Author: Leegsi, Location: Near PortsmouthPosted: Sun Apr 19, 2015 12:16 pm ---- Nice to get to the bottom of it
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [271]:
Visitors: 270
Members: 0
Staff Online Now:
Page Views:
General
