#1: PP2000 - Abs/Dam Author: Big_Aly, Posted: Sun May 03, 2015 11:52 am ---- Hi i purchased a pp2000 put on my car as the abs light was on the dash and it asked for a dam number.
The number on the door said 906583
So would that make the dam number 90658 ?? Not to sure about this.
The reason i ask is i had a permanent fault with the abs pump after putting that dam in.
The ref it gave me was 9632539480 for the part
But my abs pump that's on the car says 9630135080
Kinda confused me as different
Any help would be appreciated.
#2: Re: PP2000 - Abs/Dam Author: tRiCk, Location: MitchamPosted: Sun May 03, 2015 12:06 pm ---- Doesn't matter tbh I never check it, just put 9999 if your not doing downloads etc
#3: Re: PP2000 - Abs/Dam Author: Big_Aly, Posted: Sun May 03, 2015 12:31 pm ---- Yeah im not doing downloads just a straight global scan.
The error come back
Abs or Esp Ecu
Permanent Fault Pump motor
206Teves_mk20e
Psa ref: 9632539480
Supply ref:09
But my abs pump on the car number is 9630135080
What one do i replace it with? or any other ideas what to check?
#4: Re: PP2000 - Abs/Dam Author: MrWhite, Posted: Mon May 04, 2015 11:45 am ---- swap the abs pump Like for like the numbers on the abs its self
#5: Re: PP2000 - Abs/Dam Author: Big_Aly, Posted: Mon May 04, 2015 1:09 pm ---- Will there need to be any reprogramming done or will it be just a straight swap as havnt got a clue.
The ones I've seen for sale is the pump, with the black bit on the side with the pins ECU?? Would I need the whole unit is this how they come?
#6: Re: PP2000 - Abs/Dam Author: Timon2210, Location: PalestinePosted: Mon May 04, 2015 2:21 pm ---- You need to do configuration for the ABS unit after you replace it,using the PP2000 ofcourse.
#7: Re: PP2000 - Abs/Dam Author: Big_Aly, Posted: Mon May 04, 2015 3:46 pm ---- Is the configuration easy to do? What does it involve. Sorry for being dumb but gunna be the first time doing this so like to be all prepared. Thanks
#8: Re: PP2000 - Abs/Dam Author: Leegsi, Location: Near PortsmouthPosted: Sun Jun 14, 2015 2:08 pm ---- Never needed to do anything when I swapped mine like for like
#9: Re: PP2000 - Abs/Dam Author: gpvecchi, Location: ItalyPosted: Mon Jun 15, 2015 2:41 pm ---- Your OPR is 9085 (your car was born on 23 September 2001). The 83 is the factory of your 206. Don't look at the number on the pump, as it's a producer P/N; this is trans-coded into Pug number (the new ones are like 9632539480, the old ones are like 1109AY).
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [142]:
Visitors: 141
Members: 0
Staff Online Now:
Page Views:
General
