#1: air bag module trigger 2 Author: touche60, Posted: Sat May 16, 2015 2:17 pm ---- can some one help as I have tried to get light out and it keep's coming up with Permanent fault level of driver module trigger 2 open circuit, I have been using pp2000 on laptop and got a new srs. I have a 54 1.4 hdi.
#2: Re: air bag module trigger 2 Author: MrBSI, Location: What's it to you? ? ?Posted: Sat May 16, 2015 2:24 pm ---- Has the airbag been removed recently?
The plugs can be difficult to get in & out the sockets.
Other then that I would suspect a Com2000 fault as its in the age range for a dodgy Com.
#3: Re: air bag module trigger 2 Author: touche60, Posted: Sat May 16, 2015 2:36 pm ---- I think it was a light n/s front knock and bag has gone off, I've had a look today and all is right, plug's are tight and in the right place the ribbon is still in one peace. the airbag has been replaced.
#4: Re: air bag module trigger 2 Author: MrBSI, Location: What's it to you? ? ?Posted: Sat May 16, 2015 2:53 pm ----
touche60 wrote:
I think it was a light n/s front knock and bag has gone off, I've had a look today and all is right, plug's are tight and in the right place the ribbon is still in one peace. the airbag has been replaced.
If the airbag has been fired then you need a new airbag ecu & pair of front seatbelts as the pretensioners should have fired as well.
First time ive heard of a light knock on a multiplexed 206 actually firing an airbag, normally it takes a hefty knock.
#5: Re: air bag module trigger 2 Author: Addaz, Location: SuffolkPosted: Sat May 16, 2015 3:20 pm ---- Sounds like a comms has failed. Level 1 and 2 means how heavy the airbag fires
#6: Re: air bag module trigger 2 Author: touche60, Posted: Sun May 17, 2015 11:01 am ---- got new comms airbag light is now out thanks allan.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy