#1: Sirocco Alloys Author: MrMac, Posted: Thu Jul 02, 2015 7:57 am ---- Afternoon. Another question. Found some sirocco alloy wheels just around the corner from me. Was wondering...is the stud configuration standard and they don't have a Peugeot logo in the middle...normal? I know it has 'Peugeot Sirocco' on the inside.
Cheers
#2: Re: Sirocco Alloys Author: MrMac, Posted: Thu Jul 02, 2015 8:07 am ---- Just seen some others...supposed to have the logo stuck on the middle.
Afternoon. Another question. Found some sirocco alloy wheels just around the corner from me. Was wondering...is the stud configuration standard and they don't have a Peugeot logo in the middle...normal? I know it has 'Peugeot Sirocco' on the inside.
Cheers
Center logo is typically a stick on - could've been removed and not replaced in a refurb,,,
If they're Peugeot and 4-stud, then the center bore and bolt circle should be OK.
Offset (ET) might vary depending off what model they came, so check that - should be stamped/cast somewhere on the back...
Looks to be 7,5" wide which is fine, but if the last markings, 48 or 49, is the offset (sorry, not too used to reading rim markings), that is too high for the 206, but that could be fixed with 20-25 mm spacers
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [45]:
Visitors: 44
Members: 0
Staff Online Now:
Page Views:
General
