#1: Pug1off Quickshift = No Reverse! Author: neilneil2000, Posted: Sun Jul 19, 2015 6:03 pm ---- I fitted a new set of gear linkages and quick shift kit from Pug1off today, it fitted OK but I can no longer get the car into reverse gear
I think I am going to have to lengthen the throw to allow for the additional length of reverse gear - such a shame because the length feels really good now.
The only other warning to people installing this mod is that the position of neutral is substantially changed. Effectively 1,3 and 5 are where neutral was and 2,4 and (i expect R) are in about the same place. This makes the gear stick look a bit odd.
#2: Re: Pug1off Quickshift = No Reverse! Author: MrBSI, Location: What's it to you? ? ?Posted: Sun Jul 19, 2015 11:28 pm ---- Its sounding like its not been fitted correctly.
#3: Re: Pug1off Quickshift = No Reverse! Author: spike_202, Location: West midsPosted: Mon Jul 20, 2015 12:38 pm ---- I think you may have fitted the wrong size rods to the wrong pivot points. It shouldn't make any difference to how the gear stick sits just 'feels' a better shift.
#4: Re: Pug1off Quickshift = No Reverse! Author: neilneil2000, Posted: Tue Jul 21, 2015 5:06 pm ---- I'm not sure how it could be fitted incorrectly. :-S
The kit consists of 2 identical short rods which replace identical length short rods; one long rod, identical in length to the existing long rod and then an extension piece which effectively lengthens the long rod.
The increase in length of the long rod will surely mean the gearstick is in a different position for the same gearbox rod position. Right?
I am going to swivel the extension bar to shorten the lod. I a, hoping that will help
#5: Re: Pug1off Quickshift = No Reverse! Author: neilneil2000, Posted: Tue Jul 21, 2015 5:07 pm ---- I'm not sure how it could be fitted incorrectly. :-S
The kit consists of 2 identical short rods which replace identical length short rods; one long rod, identical in length to the existing long rod and then an extension piece which effectively lengthens the long rod.
The increase in length of the long rod will surely mean the gearstick is in a different position for the same gearbox rod position. Right?
I am going to swivel the extension bar to shorten the lod. I a, hoping that will help
#6: Re: Pug1off Quickshift = No Reverse! Author: V9977, Location: Athens, GreecePosted: Fri Jul 24, 2015 3:41 am ---- Tweak it.
#7: Re: Pug1off Quickshift = No Reverse! Author: neilneil2000, Posted: Tue Jul 28, 2015 3:20 pm ---- I've managed to recover reverse by releasing the grub screw and turning the shift adapter to slightly lengthen the throw.
It's worth noting that I have had no response at all from Pug1Off though.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [309]:
Visitors: 308
Members: 0
Staff Online Now:
Page Views:
General
