#1: New ecu - cable throttle on a 180 Author: Project2062014, Location: CornwallPosted: Mon Aug 31, 2015 5:39 pm ---- Hi peeps.
I'm wanting to put a cable throttle body or bodies given the best opinion & price.
The reason for this is so I can run a better ecu .
I have vems 3.3 in mind or mega squirt 3.
Vems is plug & play just extra! ££
So there's a manifold for jenveys that let's me keep the PAS pump. £300 with the injector holes drilled . Also can be drilled out to 55m inlet.
Twin jenveys seem affordable and will fit. For around 400.
There also single inlet jenveys throttle bodie 70mm around 280.
Am I going to gain a lot more bhp with x4 single bodies over a single 70mm bodie? +( opition to turbo in future )
Does any know the situation fitting the cable accelerator pedal ? straight Swap for a old preplex 206 throttle pedal?
Looking to change cams if affordable .
I've read on the 804.
Whats the best cams to keep the vvt & get max bhp without changing rods springs ect?
Is it better to lose vvt ?
Cheers
#2: Re: New ecu - cable throttle on a 180 Author: sean.r.steward, Location: norfolkPosted: Tue Sep 01, 2015 2:55 pm ---- If it aint broke dont fix it !
#3: Re: New ecu - cable throttle on a 180 Author: Edward, Location: In the garagePosted: Wed Sep 02, 2015 5:09 am ---- You won't get the car up and running on Jenvey throttle bodies for £400!
#4: Re: New ecu - cable throttle on a 180 Author: Project2062014, Location: CornwallPosted: Wed Sep 02, 2015 6:41 am ----
Edward wrote:
You won't get the car up and running on Jenvey throttle bodies for £400!
£1200 will & that's with the ecu in that..
probably cost a lot more for mapping the thing..
Great advice
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [82]:
Visitors: 82
Members: 0
Staff Online Now:
Page Views:
General
