#1: What on earth are these wires for!? :( Author: hussnainh8, Posted: Mon Dec 07, 2015 9:11 am ---- Hi,
Can anyone tell me what are these 4 connectors used for?
I have tried the male connector to the headlight connector but 1) the battery drains itself after 3-4hours and 2) I have no idea what the wires do because the headlights already have power from a different source.
As for the female connectors.. I do not know why they are not connected where they should be connected as the car was like this when first bought.
#2: Re: What on earth are these wires for!? :( Author: Motorracingbruce1980, Location: West SussexPosted: Mon Dec 07, 2015 9:44 am ---- Front fog wiring and Headlamp level adjustment I think
#3: Re: What on earth are these wires for!? :( Author: MrBSI, Location: What's it to you? ? ?Posted: Mon Dec 07, 2015 11:11 am ---- The grey 3 pin connector is for the crystal twin H7 headlamp.
The grey 2 pin connector is for the front fog lamp.
What headlamps are currently fitted to the car?
#4: Re: What on earth are these wires for!? :( Author: gazza82, Location: South BucksPosted: Mon Dec 07, 2015 11:43 am ---- If you look at the second picture you can see the empty headlamp socket on the back of the headlamp ...
so I would guess they are the standard single H4 bulb headlamps and this car has the multi-purpose loom ...
#5: Re: What on earth are these wires for!? :( Author: hussnainh8, Posted: Mon Dec 07, 2015 5:29 pm ---- The car has the standard H4 headlights but the H4 headlights also have a connector on the back of them where the 3 pin wire can connect too.. I did this and it just drained the battery instead :l and my 206 doesn't have front fog lights.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy