#1: 04 206 1124cc Author: adran, Posted: Fri Apr 08, 2016 3:08 pm ---- my 206 is only running on no 2 and 3 cylinders, i have replaced coil pack, injectors and spark plugs, valve timing and compressions spot on, not firing on no 1 and no 4, can anyone help me sort it out, thanks, adran
#2: Re: 04 206 1124cc Author: macca1411, Location: Westhoughton, LancashirePosted: Fri Apr 08, 2016 5:57 pm ---- How have you worked out that it's only firing on 2 and 3?
Any fault codes showing up?
Has it just started misfiring or was any work done just before it started?
#3: Re: 04 206 1124cc Author: adran, Posted: Sat Apr 09, 2016 8:20 am ---- NO FAULT CODES,STARTS FINE BUT RUNS ON 2 AND 3, I CHECKED EACH INJECTOR FOR TICKING 2 AND 3 TICK OK BUT 1 AND 4 NOTHING, FITTED SECOND HAND INJECTORS AND COIL PACK BUT NO DIFFERENCE,I HAVE CLEANED STEPPER SWITCH AND OTHER SENSORS,COMPRESSIONS 150, VALVE TIMING OK. !
#4: Re: 04 206 1124cc Author: Timon2210, Location: PalestinePosted: Mon Apr 11, 2016 3:57 am ---- you need to check the wiring loom,if there is any damage,if all is good,then i think you have a problem with the ECU
#5: Re: 04 206 1124cc Author: adran, Posted: Mon Apr 11, 2016 3:21 pm ---- I will get it checked out tomorrow thanks.
#6: Re: 04 206 1124cc Author: adran, Posted: Tue Apr 12, 2016 2:13 pm ---- checking the wiring and tested the coil pack connector, the 4 leads that go in clockwise from top left yellow/grey, grey/brown, red/white red/blue, on engine tick over i light tested them 3 leads light up ok the grey/brown is dead, should they all light up ? the engine ticks over fine at a steady 900 revs but will not road drive no power, any advice thanks.
#7: Re: 04 206 1124cc Author: adran, Posted: Mon May 23, 2016 3:30 pm ---- HI, Thanks Timon2210 it was the ECU,
car now goes well, Thanks to all for their advice,
adran.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy