#1: Help identify this part please! Author: Muddytoast, Posted: Mon Aug 15, 2016 12:35 pm ---- This ring is rattling over bumps, the other side is tight but this one spins and has movement to rattle.
What is it? Any idea on the problem? Its just a passed it's MOT.
#2: Re: Help identify this part please! Author: gpvecchi, Location: ItalyPosted: Mon Aug 15, 2016 1:40 pm ---- That's an heat shield to protect the gum from brake heat. It should not be so noisy... If you want to raplace it, it's very cheap.
#3: Re: Help identify this part please! Author: Muddytoast, Posted: Mon Aug 15, 2016 2:31 pm ---- Awesome, thanks for your help
The play is up and down, as shown in this image.
Worth replacing? I assume it's the rubber seal that needs replacing not the heat shield ring as it look as thin on the other side?
#4: Re: Help identify this part please! Author: Steve206, Location: UKPosted: Tue Aug 16, 2016 6:41 pm ---- Probably the ball joint knackered. Not the heat shield
#5: Re: Help identify this part please! Author: gpvecchi, Location: ItalyPosted: Tue Aug 16, 2016 6:52 pm ---- I replaced mine because of a tinging sound. If it's more a knock, it's the joint.
#6: Re: Help identify this part please! Author: Muddytoast, Posted: Wed Aug 17, 2016 10:53 am ---- It's not a knocking it is definitely a metallic rattle. Like shaking the washer on and nut.
Wiggling that ring makes the exact same sound, The question is what is allowing the ring to move??
#7: Re: Help identify this part please! Author: Muddytoast, Posted: Wed Aug 17, 2016 12:44 pm ---- If it helps here are a few pictures of both sides
#8: Re: Help identify this part please! Author: Edward, Location: In the garagePosted: Wed Aug 17, 2016 2:30 pm ---- There are little tangs that sit in the gap in the hub to ball joint mount. If the tang is squashed flat it will allow the shield to move about.
#9: Re: Help identify this part please! Author: gpvecchi, Location: ItalyPosted: Wed Aug 17, 2016 4:01 pm ---- There's a small piece that fits into yoke groove. If that is consumed, it rattles. Buy a new one it's 1 or 2£.
#10: Re: Help identify this part please! Author: Muddytoast, Posted: Thu Aug 18, 2016 7:04 am ---- Thanks guys! Very much appreciate the help. I'll check + get one ordered
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [317]:
Visitors: 316
Members: 0
Staff Online Now:
Page Views:
General
