#1: Peugeot 206 caliper bolt help Author: Danweider, Posted: Fri Jun 16, 2017 9:20 am ---- Hi, I had planned to do some work on the Peugeot 206. Taking the brake calipers off, removing the frame, the pads, and discs and giving it all a good clean. Now the first 2 bolts, to remove the caliper, was easy no problems there. Now the 2 bolts to remove the caliper frame, brought me to a halt. I think its a Torx hole, but I am just wondering whether any one else has come across this issue and know the size of the Torx, piece needed?
Any help would be greatly appreciated!
Thanks
Dan
#2: Re: Peugeot 206 caliper bolt help Author: mtempsch, Location: Gothenburg, SwedenPosted: Fri Jun 16, 2017 11:36 am ----
Danweider wrote:
Hi, I had planned to do some work on the Peugeot 206. Taking the brake calipers off, removing the frame, the pads, and discs and giving it all a good clean. Now the first 2 bolts, to remove the caliper, was easy no problems there. Now the 2 bolts to remove the caliper frame, brought me to a halt. I think its a Torx hole, but I am just wondering whether any one else has come across this issue and know the size of the Torx, piece needed?
Any help would be greatly appreciated!
Thanks
Dan
A quick search (see up left) for 'torx caliper size' spat out two posts that say it's T55
#3: Re: Peugeot 206 caliper bolt help Author: Edward, Location: In the garagePosted: Fri Jun 16, 2017 1:57 pm ---- Is it a later 206? Earlier ones had a 19mm bolt which is much better. I know the 207 used torx bolts.
#4: Re: Peugeot 206 caliper bolt help Author: cube, Location: LeedsPosted: Mon Jun 19, 2017 8:21 pm ---- You'll need a T55 torx bit matey
#5: Re: Peugeot 206 caliper bolt help Author: Danweider, Posted: Tue Jun 20, 2017 12:19 pm ---- Thank you for your help guys, I did in fact go and get a T55 bit but I am yet to do the work as the heat is making the floor too hot at the moment. Its a 2005 Peugeot 206, so whether or not they changed the bolts for security reasons or something im not sure
#6: Re: Peugeot 206 caliper bolt help Author: gazza82, Location: South BucksPosted: Wed Jun 21, 2017 9:42 am ----
Danweider wrote:
... so whether or not they changed the bolts for security reasons or something im not sure
It's because they are French and they can ...
#7: Re: Peugeot 206 caliper bolt help Author: Steve206, Location: UKPosted: Fri Jun 23, 2017 5:30 pm ----
Danweider wrote:
Thank you for your help guys, I did in fact go and get a T55 bit but I am yet to do the work as the heat is making the floor too hot at the moment. Its a 2005 Peugeot 206, so whether or not they changed the bolts for security reasons or something im not sure
I can guarantee you won't be undoing these. Unless you bought a decent solid torx bit and they aren't seized on there.
#8: Re: Peugeot 206 caliper bolt help Author: cube, Location: LeedsPosted: Fri Jun 23, 2017 6:53 pm ---- Danweider, did you get my PM mate ??
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [334]:
Visitors: 333
Members: 0
Staff Online Now:
Page Views:
General
