#1: Misfire 206 1.4 16v kfw Author: Karlos88, Posted: Thu Mar 01, 2018 8:34 am ---- Hi can anyone help or as anyone had the same problems I have a Peugeot 206
With a misfire I have replaced the head gasket as it was leaking oil on to the cambelt plus was burning water I have changed the coil pack with a good unit & make replaced plugs had the ecu tested which came back good
Also I have changed the injectors as I got some from a scrape car
I am thinking wireing fault has anyone come across this starting to pull my hair out any help would be great thanks Karl
It’s a 2005 1,4 16v kfw
#2: Re: Misfire 206 1.4 16v kfw Author: MrBSI, Location: What's it to you? ? ?Posted: Thu Mar 01, 2018 4:20 pm ---- Did you use the correct locking tools for the ET3 engine when you timed up the engine while doing the head gasket / cambelt?
There is also a software update for the engine ecu.
You didn't fit NGK spark plugs i hope.
Have you removed & cleaned the VVT solenoid?
Has it been scanned with Peugeot Planet / Diagbox?
#3: Re: Misfire 206 1.4 16v kfw Author: VorTechS, Location: Gloucestershire, UKPosted: Fri Mar 02, 2018 11:39 am ----
MrBSI wrote:
There is also a software update for the engine ecu.
Ah, I asked as that seemed to be more of a statement rather than a question - I thought you had some way of finding out! Last edited by VorTechS on Fri Mar 02, 2018 2:22 pm; edited 1 time in total
#4: Re: Misfire 206 1.4 16v kfw Author: MrBSI, Location: What's it to you? ? ?Posted: Fri Mar 02, 2018 2:01 pm ----
VorTechS wrote:
MrBSI wrote:
Did you use the correct locking tools for the ET3 engine when you timed up the engine while doing the head gasket / cambelt?
There is also a software update for the engine ecu.
You didn't fit NGK spark plugs i hope.
Have you removed & cleaned the VVT solenoid?
Has it been scanned with Peugeot Planet / Diagbox?
How can I find out if there's a software update for the ECU on my 180?
Ask your Peugeot main dealer to plug it in & check for updates.
#5: Re: Misfire 206 1.4 16v kfw Author: Karlos88, Posted: Fri Mar 02, 2018 8:13 pm ---- Hi thanks for reply with the timing I locked the crank & both cams with the locking tools so it can’t be wrong I also did clean the vvti solenoid as I took it out as I had the head skimmed & pressure tested Bosch plugs fitted
Have scanned it & getting injector supply fault which was on launch
But no fault code just that only I have had the injectors out I picked up a second hand rail up with 4 injectors in it from the scrape yard but still the same.but now it won’t start at all I am thinking wireing or earth problem
Has anyone got any ideas thanks karl
#6: Re: Misfire 206 1.4 16v kfw Author: Karlos88, Posted: Fri Mar 02, 2018 8:28 pm ---- I also have checked voltage to each injector 2.5 volts to each one can’t seem
To check the earth as such as it goes over to the fuse box I have checked it from the fuse box up to the muti plug for contonewite exuse my spelling shocking
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy