#1: 2005 206CC has no power when accelerating Author: pugsforlife, Posted: Tue May 15, 2018 5:40 am ---- the car generally drives fine but when accelerating from a standstill (esp first drive of the day) the engine loses a lot of power and you need to rev it up to get going.
our mechanic has no idea. ive run a scan, no DTCs. ive replaced the air filter, used a throttle cleaner, fuel injector cleaner, checked the plugs and now im wondering if i should try MAF sensor cleaner
so my question is a really stupid one but do these 206s have a MAF, and if so where is it? i know it should be somewhere between the air duct and the throttle - just not sure if im missing it.
its a 2.0L petrol 2005 206CC
photo below is the engine with the area i think it should be circled... any ideas on this enigma?? thanks
#2: Re: 2005 206CC has no power when accelerating Author: Steve206, Location: UKPosted: Tue May 15, 2018 5:10 pm ---- No maf sensor, it's a petrol. What happens when you put your foot down in other gears. Do the refs rise then fall back?
#3: Re: 2005 206CC has no power when accelerating Author: pugsforlife, Posted: Tue May 15, 2018 7:58 pm ---- ok so this model only has a map sensor then?
its really only at low speeds so issues with first, second & reverse. no major issues when driving at speed
#4: Re: 2005 206CC has no power when accelerating Author: pugsforlife, Posted: Tue May 15, 2018 8:24 pm ---- actually does anyone know where the map sensor is located? im thinking i might use some maf cleaner on it to see if that helps.
#5: Re: 2005 206CC has no power when accelerating Author: MrBSI, Location: What's it to you? ? ?Posted: Wed May 16, 2018 3:49 am ---- Scan it with Peugeot Planet / Diagbox, i suspect it will flag the electronic fly by wire throttle body being at fault.
Generic EOBD / crappy Snap On scanners usually won't pick this fault up.
#6: Re: 2005 206CC has no power when accelerating Author: gazza82, Location: South BucksPosted: Wed May 16, 2018 10:11 am ----
pugsforlife wrote:
actually does anyone know where the map sensor is located? im thinking i might use some maf cleaner on it to see if that helps.
Usually a waste of time. If its failing, it's the electronics. I have in the past used contact cleaner (it has to evaporate leaving no residues) but this tended to just mean it fails completely quicker.
I did hear of someone who washed his .. I don't suggest trying that!
#7: Re: 2005 206CC has no power when accelerating Author: pugsforlife, Posted: Wed May 16, 2018 6:44 pm ---- cool, well looking at the forum seems like its a common problem. will try the maf cleaner first.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17139
Online Now [470]:
Visitors: 469
Members: 0
Staff Online Now:
Page Views:
General
