#1: 206 gti 2000 reg running on 2 cylinders Author: usher, Location: northallertonPosted: Fri Feb 22, 2019 6:27 pm ---- Can anyone shed light on this I have a 206 gti 2000 reg that I'm turning into a track car. I serviced it the other month everything was running sweet no issues untill I turned it off the power steering pipe burst no drama but the next day when I started it up it ran horribly on cylinders 2 and 3. I've changed the coil pack with no luck. I've even changed the interior loom with no luck the obd isn't showing any fault codes. I've checked all wires and connectors with nothing standing out of the ordinary
Does anyone have anything to try. The plugs in 1 and 4 are wet so fuel is getting to the cylinders. I've tested the plugs outside of the engine and 1 and 4 are not sparkng as expected oh they have also been replaced there isn't much left unchanged lol
Thanks in advance
#2: Re: 206 gti 2000 reg running on 2 cylinders Author: PezHdi, Location: ShrewsburyPosted: Sat Feb 23, 2019 7:54 am ---- Leads from coil pack to plugs?
#3: Re: 206 gti 2000 reg running on 2 cylinders Author: usher, Location: northallertonPosted: Sat Feb 23, 2019 11:55 am ---- Coil pack has been changed and wires look fine as do connections to ecu plugs etc
#4: Re: 206 gti 2000 reg running on 2 cylinders Author: usher, Location: northallertonPosted: Sat Feb 23, 2019 3:29 pm ---- Gone over checked all contacts and checked all wires for brakes and corrosion. Used contact spray and tested sparks again. I even swapped the 2 wires that control the spark and no luck was a long shot. Gonna change the ecu now anything to look for when getting another ecu
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy