#242: Re: Project vRS Update pg16 Author: Dabamash, Location: The car in frontPosted: Tue Jun 21, 2011 4:25 pm ----
mattievrs wrote:
Dabamash wrote:
Hold on, I recognise that car park....
Haha!
Took it about a minute before you turned up mate!
Wondered what you were faffing about with lol
#243: Re: Project vRS Update pg16 Author: mattievrs, Location: LeicesterPosted: Tue Jun 21, 2011 4:35 pm ---- Hehe! I tend not to take much notice of my surroundings! Get some pics up of the backbox when its fitted.
#244: Re: Project vRS Update pg16 Author: mattievrs, Location: LeicesterPosted: Wed Jun 22, 2011 5:48 am ---- Another update! Never done so much work on the car over 2 days!
New front discs fitted!And yes, the wheels and car need a good clean!
And still to do over the next couple of days, ive got a new oem intercooler as the mountings on the other are broken and also have a rear strut brace to fit.
Also found out yesterday there are a couple of holes in the air intake pipe that seem to have appeared after rubbing on a clamp. So have ordered a new pipe. So that'll be fitted asap when it arrives.
Thanks for looking.
#245: Re: Project vRS Update pg17 Author: mattievrs, Location: LeicesterPosted: Thu Jun 23, 2011 12:15 pm ---- Next update!
Fitted the new intercooler this afternoon, The old one with busted clips and mounts
New one fitted with the mounts intact
Whilst the arch liner was out i did a little "pikey" mod to get more cool air passing through and around the Intercooler
So out came the Dremel and..........
And fitted back in the arch
Also fitted the rear strut brace in place aswell
Cut the carpet to neaten it all up
And added a sticker!
Thanks for looking
#246: Re: Project vRS Update pg17 Author: mattievrs, Location: LeicesterPosted: Wed Jun 29, 2011 1:18 pm ---- Another update!
Went upto Shark Performance in Mansfield today for the remap! After finding out my Fabia was already mapped by an unknown company, and it having a bit of an agressive map (boost and torque wise) i had a shark map uplaoded to the ecu. It now feels alot smoother on and off boost and seems to pull more progressively in my opinion. Figures before were 149bhp with 310ft/lb of torque with 1.8psi of boost and are now 168.8bhp and 295ft/lb of torque with 1.8psi of boost. Although the torque figure has dropped slightly (i chose this as the standard clutch is good for 300ft/lb of torque and no more) the power is alot more useable and pulls noticeably better through all 6 gears. So all in all, im really happy with the new map.
Thanks for looking
#247: Re: Project vRS Update pg17 Author: Edward, Location: In the garagePosted: Wed Jun 29, 2011 1:35 pm ---- Should have painted the non contact surfaces of the disc in silver Hammerite. Keeps them looking brand new and stops them corroding.
Should have painted the non contact surfaces of the disc in silver Hammerite. Keeps them looking brand new and stops them corroding.
The car isnt a show queen mate! I dont really mind rust on the non contact surfaces. But point taken.
#250: Re: Project vRS Update pg17 Author: Mattie-RS, Location: A Track near you ;)Posted: Wed Jun 29, 2011 5:04 pm ---- Looking lovely mate, Like the rear strut brace mine should be hear soon with cage too
The map sounds good too, i always thought they had more bhp for some reason tho
#251: Re: Project vRS Update pg17 Author: mattievrs, Location: LeicesterPosted: Mon Jul 18, 2011 9:28 am ---- Small update
I've now got matching rear discs which came up very cheap, so I thought why not!
Thanks for looking
#252: Re: Project vRS Update pg17 Author: Howey, Location: Kings LynnPosted: Mon Jul 18, 2011 9:56 am ---- Love what you have done Matty! Nice work
#254: Re: Project vRS Update pg17 Author: mattievrs, Location: LeicesterPosted: Tue Jul 19, 2011 9:56 am ---- Another small update! I think i must be running out of things to do now!
So i got busy with the Smooth Green Hammerite and painted the rear towing eye!
Before
After
To be honest you cant really see it unless you are a car length behind the car but i like it!
Thanks for looking
#255: Re: Project vRS Update pg17 Author: mattievrs, Location: LeicesterPosted: Tue Jul 26, 2011 1:38 pm ---- Another small update. Managed to get hold of some number plate surrounds and fitted them. Im not sold on the front one as it sticks out a bit too much for my liking but like the rear one.
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [309]:
Visitors: 308
Members: 0
Staff Online Now:
Page Views:
General
