#76: Re: GTi Track Car Author: macj, Location: EssexPosted: Wed Oct 27, 2010 9:01 am ---- I had the same problem with the hazards... used a lucus switch from a Leyland Daf .... ebay £20. It just pulls on and has a built in bulb
#77: Re: GTi Track Car Author: macj, Location: EssexPosted: Thu Oct 28, 2010 11:45 am ---- These are a good buy cgi.ebay.co.uk/Peugeot...3cb1d6de12
#78: Re: GTi Track Car Author: st3v3n, Location: Liverpool Drives: 206 GTiPosted: Thu Oct 28, 2010 2:00 pm ---- Have you got some mac? I was half thinking of making the bottom end flat with ally for trach use, but sould be a pain in the ass on a rally car.
#79: Re: GTi Track Car Author: macj, Location: EssexPosted: Thu Oct 28, 2010 2:11 pm ---- I got them fitted.... very good product
#80: Re: GTi Track Car Author: st3v3n, Location: Liverpool Drives: 206 GTiPosted: Thu Oct 28, 2010 2:17 pm ---- I'll have to watch that later. no youtube access in work
#81: Re: GTi Track Car Author: tb206hdi, Location: DenmarkPosted: Fri Oct 29, 2010 12:52 am ----
Lower the rev limit a bit It spins the wheels quite a bit once you launch it
No limited slip diff in that gearbox.... Just got one to fit now. Quaife ATB
That will make a big difference when its fitted!!
How is the wiring loom coming along mate?
#84: Re: GTi Track Car Author: st3v3n, Location: Liverpool Drives: 206 GTiPosted: Fri Oct 29, 2010 12:05 pm ---- That video is amazing!
Wiring loom is coming along nicely, I'll get more pics up tonight
#85: Re: GTi Track Car Author: st3v3n, Location: Liverpool Drives: 206 GTiPosted: Sun Oct 31, 2010 7:44 pm ----
While you're down there
6kg, bon.
We felt the job of detailing the radiator needed a variety of screwdrivers.
Rear body loom is basically finished now. The observant amongst you will notice that it was originally fitted to the OS with a view to reducing the wire length from the body control unit behind the dash on the OS which then trailed over to the NS before going rearward. Then we realised we could reduce things yet further by re-routing everything NS via the glove-box fuse-box. So this is the final fix now I hope
Window job while we've got the sheet there waiting for the cut. Really nice stuff to work with.
Actually fitted in that last pic, shiny.
Holes are repainted after being drilled, don't worry the door was masked at that time
Other window in tomorrow as well as the backs going back in. Hopefully got some brake pipe jobs on as well if we finally get a bias valve
#86: Re: GTi Track Car Author: macj, Location: EssexPosted: Mon Nov 01, 2010 12:34 am ---- You are getting there guys... nice job
#87: Re: GTi Track Car Author: st3v3n, Location: Liverpool Drives: 206 GTiPosted: Mon Nov 01, 2010 11:35 am ---- www.youtube.com/watch?v=NCNlLuET_sE
#88: Re: GTi Track Car Author: Teebag, Location: exhall, bedworth, coventryPosted: Mon Nov 01, 2010 11:48 am ---- looks good matey!
#89: Re: GTi Track Car Author: Schumi, Location: Istanbul / TurkeyPosted: Mon Nov 01, 2010 4:28 pm ---- You need some gti 180 inlet or ITB. Is this first start with Omex ECU ?
#90: Re: GTi Track Car Author: wardie_206, Location: Rayleigh, essexPosted: Mon Nov 01, 2010 4:35 pm ---- looking really good mate
We are not responsible for comments posted by our users, as they are the property of the poster
Interactive software released under GNU GPL,
Code Credits,
Privacy Policy
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17129
Online Now [145]:
Visitors: 144
Members: 0
Staff Online Now:
Page Views:
General
It spins the wheels quite a bit once you launch it 
