|
Author
|
Message |
|
|
 Posted: Sun Mar 10, 2013 8:45 am |
|
|
|
|
Joined: Aug 09, 2012
Posts: 183
Trade Rating: +1
|
 |
Hi
I have now been trying for 2 day to get the off side rear hub of my 2005 Pug 206 1.4 HDI.
I have managed to get the NSR off but this just will not budge!
I have tried everything, Hub puller, wacking with a club hammer, putting the wheel back on and kicking it from the inner side, spraying loads of penatrive oil but it just wont move...
I am replacing the Axle as the lower arm bearings have had it!
I suppose now I will also need new wheel bearings.
Any good tips how I might get it off?
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Sun Mar 10, 2013 9:34 am |
|
|
|
|
Joined: May 25, 2011
Posts: 1025
Trade Rating: +1
Location: south coast
|
|
heating it all up may help.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Mar 10, 2013 9:39 am |
|
|
|
|
Joined: Aug 09, 2012
Posts: 183
Trade Rating: +1
|
|
Bit worried it will damage the brake cylinder rubbers.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Mar 10, 2013 9:52 am |
|
|
|
|
Joined: May 25, 2011
Posts: 1025
Trade Rating: +1
Location: south coast
|
|
yeah it proberly will i have got a puller here that i can run over to you but you say you have tried one.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Mar 10, 2013 9:54 am |
|
|
|
|
Joined: Aug 09, 2012
Posts: 183
Trade Rating: +1
|
|
| broadblaster wrote: |
| yeah it proberly will i have got a puller here that i can run over to you but you say you have tried one. |
I did have one but I snapped it trying to get it off!
Are you far from Selsey?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Mar 10, 2013 9:56 am |
|
|
|
|
Joined: May 25, 2011
Posts: 1025
Trade Rating: +1
Location: south coast
|
|
no i'm in birdham mate so as said i can run one over to you if you need it
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Mar 10, 2013 12:25 pm |
|
|
|
|
Joined: Mar 27, 2010
Posts: 3017
Trade Rating: 0
Location: Running from Ant and Lee and Adam...........
|
|
Cut the back plate and find out why it's not coming off.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Mar 10, 2013 5:28 pm |
|
|
|
|
Joined: Apr 12, 2011
Posts: 9
Trade Rating: +1
Location: Newcastle
|
|
Had the same problem with my rear hub on my 1.4HDI. i got a large round punch and a big hammer and punched the stub axle through the middle of the drum and out the back. it does take some doing but your hubs probably stuck on the bearing. i punched mine out and got the drum off and then just hammered the stub axle back in from the other side.
Use a punch as not to damage the threads. You may need to resit the bearings in the drum as mine had split apart in the middle but they werent damaged in my case.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Mar 11, 2013 3:02 am |
|
|
|
|
Joined: Aug 09, 2012
Posts: 183
Trade Rating: +1
|
|
I will give that a go, thanks.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Mar 11, 2013 7:32 am |
|
|
|
|
Joined: Aug 09, 2012
Posts: 183
Trade Rating: +1
|
|
Nope still wont come off!
3 days I've been trying.
I am going to try using a sledge hammer now to bang the axle stub through!
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Mar 11, 2013 10:32 am |
|
|
|
|
Joined: Aug 09, 2012
Posts: 183
Trade Rating: +1
|
|
3 days and 7 hours and the rear drum is now NOW OFF, hooray!!!
I can't believe how hard the bearings were stuck on that shaft!
Anyway thanks to everyone for your advice especially Broadblaster who took the time to come over to try and help me out.
In the end I used a sledge hammer to knock the axle stub through a little which freed it up.
I might need to fit new bearings now but I cant get the circlip out of the Drum, and by the look of the replies I have had from the Forum neither does anyone else!
Now to for the recon Axle.
Thanks again
Paul
| | |
|
|
|
|
Last edited by A10PSW on Mon Mar 11, 2013 10:44 am; edited 2 times in total
|
|
|
|
|
|
|
Posted: Mon Mar 11, 2013 10:32 am |
|
|
|
|
Joined: Jan 29, 2011
Posts: 6526
Trade Rating: +10
Location: Westhoughton, Lancashire
|
|
Is it the drum you're struggling with or the stub axle itself?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Mar 11, 2013 10:57 am |
|
|
|
|
Joined: Nov 27, 2010
Posts: 11520
Trade Rating: +10
Location: What's it to you? ? ?
|
|
When in doubt give it a CLOUT 
| | |
|
|
|
|
 | |  |
| Toyota C-HR GR Sport 2.0 Hybrid with JBL & Alcantara packs. | |
 | |  |
|
|
|
|
|
|
|
Posted: Mon Mar 11, 2013 2:21 pm |
|
|
|
|
Joined: May 25, 2011
Posts: 1025
Trade Rating: +1
Location: south coast
|
|
ah ha glad you got it off mate as i got told last night that was the way to do it in the end then lol lol
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 1
Overall: 17129
Online Now [253]:
Visitors: 252
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
