|
Author
|
Message |
|
|
 Posted: Sun May 15, 2011 3:12 pm |
|
|
|
|
Joined: Feb 22, 2010
Posts: 311
Trade Rating: +4
Location: Coventry/Manchester
|
 |
Hey,
First of all, I have had a search and looked at like 20 different clutch threads, but nothing describes the same symptoms as this (including the clutch FAQ thread.) Also checked my Haynes.
When I have my clutch pressed to the floor, i can hear something spinning (flywheel?). I can also feel a slight vibration sensation in the pedal itself, as though something is loose. Could this be the release bearing or something like that? Should I worry about it?
Edit: There is no noise during the depressing/releasing of the pedal.
Just to give you a bit of extra information: I suffer from clutch judder, but I'm already aware of the reasons for this and the solution. (Most likely need flywheel replacing or skimming, and clutch kit replacing) BUT, maybe this is linked to my problem.
Any knowledge and experience anyone could offer would be much appreciated.
Cheers, Rob
| |  |
|
|
 |
 | |  |
| Jun 09 - Nov 09: Peugeot 106 1.1 Independence
Nov 09 - January 10: Vauxhall Astra 1.6 8v Club
January 10 - June 10: Peugeot 206 1.4 GLX
June 10 - Present: Peugeot 206 2.0 GTi | |
 | |  |
|
|
|
|
|
|
|
Posted: Sun May 15, 2011 3:14 pm |
|
|
|
|
Joined: Sep 11, 2010
Posts: 79
Trade Rating: 0
Location: Nottingham
|
|
spinning noise with pedal pressed to the floor is worn release bearing dude
| | |
|
|
|
|
| | |
| drive fast !!! live life faster !!! | |
| | |
|
|
|
|
|
|
|
Posted: Sun May 15, 2011 3:17 pm |
|
|
|
|
Joined: Feb 22, 2010
Posts: 311
Trade Rating: +4
Location: Coventry/Manchester
|
|
Just as I thought. I'll get it seen to in June once uni is out of the way.
Thanks!
| | |
|
|
|
|
| | |
| Jun 09 - Nov 09: Peugeot 106 1.1 Independence
Nov 09 - January 10: Vauxhall Astra 1.6 8v Club
January 10 - June 10: Peugeot 206 1.4 GLX
June 10 - Present: Peugeot 206 2.0 GTi | |
| | |
|
|
|
|
|
|
|
Posted: Sun May 15, 2011 3:19 pm |
|
|
|
|
Joined: Mar 08, 2010
Posts: 43
Trade Rating: 0
Location: Thornaby, stockton-on-tees
|
|
sounds like release bearing mine was the same get ckutch kit done asap I got jammed in 3rd and it shattered my thrust guide arm because I left it ti long lok
| | |
|
|
|
|
| | |
| The roads where our race course, and you died a happy man  R.I.P mate never forgotten bruv
Benson206 06/12/2010 | |
| | |
|
|
|
|
|
|
|
Posted: Sun May 15, 2011 3:20 pm |
|
|
|
|
Joined: Sep 11, 2010
Posts: 79
Trade Rating: 0
Location: Nottingham
|
|
be careful tho mate if too many miles done there could b the poss of the bearing f@*kin up totally and you will have to crash box the gears with no clutch or get it recovered to get it home.
| | |
|
|
|
|
| | |
| drive fast !!! live life faster !!! | |
| | |
|
|
|
|
|
|
|
Posted: Sun May 15, 2011 3:24 pm |
|
|
|
|
Joined: Feb 22, 2010
Posts: 311
Trade Rating: +4
Location: Coventry/Manchester
|
|
Nice one I'll be sure to get it done the week i get back home. I won't be driving it very much until then anyway.
What is a thrust guide arm, is it a gear linkage?
| | |
|
|
|
|
| | |
| Jun 09 - Nov 09: Peugeot 106 1.1 Independence
Nov 09 - January 10: Vauxhall Astra 1.6 8v Club
January 10 - June 10: Peugeot 206 1.4 GLX
June 10 - Present: Peugeot 206 2.0 GTi | |
| | |
|
|
|
|
|
|
|
Posted: Sun May 15, 2011 3:29 pm |
|
|
|
|
Joined: Sep 11, 2010
Posts: 79
Trade Rating: 0
Location: Nottingham
|
|
no its wt shoves the bearing on to the clutch
| | |
|
|
|
|
| | |
| drive fast !!! live life faster !!! | |
| | |
|
|
|
|
|
|
|
Posted: Sun May 15, 2011 3:32 pm |
|
|
|
|
Joined: Feb 22, 2010
Posts: 311
Trade Rating: +4
Location: Coventry/Manchester
|
|
Oh right, so part of the clutch kit then.
As I said, I won't be driving it again until I take it back down to Coventry. I'll get it booked in for the following day to make sure nothing goes wrong too soon.
Thanks for your help guys. I know very little about clutches/gearboxes.
| | |
|
|
|
|
| | |
| Jun 09 - Nov 09: Peugeot 106 1.1 Independence
Nov 09 - January 10: Vauxhall Astra 1.6 8v Club
January 10 - June 10: Peugeot 206 1.4 GLX
June 10 - Present: Peugeot 206 2.0 GTi | |
| | |
|
|
|
|
|
|
|
Posted: Sun May 15, 2011 3:33 pm |
|
|
|
|
Joined: Mar 08, 2010
Posts: 43
Trade Rating: 0
Location: Thornaby, stockton-on-tees
|
|
its the arm the release bearing glides on
| | |
|
|
|
|
| | |
| The roads where our race course, and you died a happy man R.I.P mate never forgotten bruv
Benson206 06/12/2010 | |
| | |
|
|
|
|
|
|
|
Posted: Mon May 16, 2011 3:13 am |
|
|
|
|
Joined: Apr 15, 2010
Posts: 514
Trade Rating: +1
Location: Eastbourne
|
|
ye, there brittle at the ends wer the bearing sits, i have seen them snap a few times, and are NOT PART of the clutch kit
| | |
|
|
|
|
| | |
| *DEAD*206 Gti 138
Toyota Celica T sport 205 BHP | |
| | |
|
|
|
|
|
|
|
Posted: Mon May 16, 2011 4:02 am |
|
|
|
|
Joined: Mar 08, 2010
Posts: 43
Trade Rating: 0
Location: Thornaby, stockton-on-tees
|
|
| leigh_boy wrote: |
| ye, there brittle at the ends wer the bearing sits, i have seen them snap a few times, and are NOT PART of the clutch kit |
extra 16 quid for mine but luckily my mechanic didnt want any extra to fit some garages will put one hour labour charge on
| | |
|
|
|
|
| | |
| The roads where our race course, and you died a happy man R.I.P mate never forgotten bruv
Benson206 06/12/2010 | |
| | |
|
|
|
|
|
|
|
Posted: Mon May 16, 2011 5:24 am |
|
|
|
|
Joined: Feb 22, 2010
Posts: 311
Trade Rating: +4
Location: Coventry/Manchester
|
|
| leigh_boy wrote: |
| ye, there brittle at the ends wer the bearing sits, i have seen them snap a few times, and are NOT PART of the clutch kit |
Good info thanks. Cheers guys.
| | |
|
|
|
|
| | |
| Jun 09 - Nov 09: Peugeot 106 1.1 Independence
Nov 09 - January 10: Vauxhall Astra 1.6 8v Club
January 10 - June 10: Peugeot 206 1.4 GLX
June 10 - Present: Peugeot 206 2.0 GTi | |
| | |
|
|
|
|
|
|
|
Posted: Mon May 16, 2011 6:30 am |
|
|
|
|
Joined: Feb 22, 2010
Posts: 311
Trade Rating: +4
Location: Coventry/Manchester
|
|
Just got a quote: £220 + VAT. Replacing of 3 piece clutch kit inc. labour. Pretty happy with that price. Is a standard kit as well, not a cheap one.
| | |
|
|
|
|
| | |
| Jun 09 - Nov 09: Peugeot 106 1.1 Independence
Nov 09 - January 10: Vauxhall Astra 1.6 8v Club
January 10 - June 10: Peugeot 206 1.4 GLX
June 10 - Present: Peugeot 206 2.0 GTi | |
| | |
|
|
|
|
|
|
|
Posted: Mon May 16, 2011 11:03 am |
|
|
|
|
Joined: Feb 08, 2010
Posts: 10151
Trade Rating: +12
|
|
valeo or Sachs?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon May 16, 2011 11:22 am |
|
|
|
|
Joined: May 16, 2010
Posts: 51
Trade Rating: 0
Location: England Near Manchester
|
|
Exactly what happend to mine and i got stuck in the city centre lol!
220 is cheap i think mine was around 380 all together but i had the radiator bled etc aswel.
good luck
| | |
|
|
|
|
| | |
| Corsa B 1.2
206 2000- GLX 1.6
A mob scenes forming.... | |
| | |
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17126
Online Now [73]:
Visitors: 72
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
