|
Author
|
Message |
|
|
 Posted: Thu Sep 08, 2011 11:48 am |
|
|
|
|
Joined: Jul 01, 2010
Posts: 560
Trade Rating: 0
Location: Plymouth
|
 |
Hi all
what is the easiest way to remove the drive shaft to change outer cv boot this is the way i am guessing just by looking
undone track rod end bolt
take brake caliper off tie out of the way
undone the suspeion bolt
take split pin out undone hub nut
knock the hub down to get the suspenion arm out of it then pull drive shaft out of gearbox plugging the hole with some paper
finally remove out of hub
| |  |
|
|
 |
 | |  |
| 2003 Pug 206 2.0 GTI 180
IT TAKES TALENT TO BE THIS NOOB!!!! | |
 | |  |
|
|
|
|
|
|
|
Posted: Thu Sep 08, 2011 12:08 pm |
|
|
|
|
Joined: Mar 29, 2010
Posts: 3977
Trade Rating: +15
Location: Halifax
|
|
You don't need to take the hub from the strut and you don't need to remove the shaft from the gearbox. You can pull the hub far enough out to get the shaft out. Then take off the inner boot and remove from the rest of the shaft. You don't have to make a mess then and its easier than getting the whole shaft out.
Someone best confirm this as its a 180 but you should be able to do it that way.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Sep 08, 2011 12:27 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 4455
Trade Rating: +1
Location: Essex
|
|
I thought there was kits that meant you didn't have to remove anything. Just cut off the old one & slip the new one on & seal it.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Sep 08, 2011 12:52 pm |
|
|
|
|
Joined: Apr 16, 2010
Posts: 1152
Trade Rating: +1
Location: in the house
|
|
|
|
|
|
|
|
|
|
|
Posted: Thu Sep 08, 2011 1:01 pm |
|
|
|
|
Joined: Dec 16, 2010
Posts: 1315
Trade Rating: +3
Location: Ips
|
|
That looks s**t ! eBay crap to cut corners
| | |
|
|
|
|
|
WARNING: This User Has Had Bad Trade Feedback In The Past
|
|
|
|
|
|
|
Posted: Thu Sep 08, 2011 1:29 pm |
|
|
|
|
Joined: Jul 01, 2010
Posts: 560
Trade Rating: 0
Location: Plymouth
|
|
yer i agree with the ebay crap its a glue one i dont think it would last 5mins
| | |
|
|
|
|
| | |
| 2003 Pug 206 2.0 GTI 180
IT TAKES TALENT TO BE THIS NOOB!!!! | |
| | |
|
|
|
|
|
|
|
Posted: Thu Sep 08, 2011 1:57 pm |
|
|
|
|
Joined: Feb 08, 2010
Posts: 10151
Trade Rating: +12
|
|
| LilLew wrote: |
| yer i agree with the ebay crap its a glue one i dont think it would last 5mins |
that's all you need before selling a car/ pass mot 
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Sep 08, 2011 2:00 pm |
|
|
|
|
Joined: Feb 08, 2010
Posts: 10151
Trade Rating: +12
|
|
|
|
|
|
|
|
|
|
|
Posted: Thu Sep 08, 2011 2:08 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 1810
Trade Rating: +2
Location: devon
|
|
remove wheel
undo lower arm bolt and remove ball joint from hub
undo centre nut and tap out shaft with copper mallet
replace boot
the shaft should come out without having to remove anything else 
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17128
Online Now [309]:
Visitors: 308
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
