|
Author
|
Message |
|
|
 Posted: Thu Apr 05, 2012 10:53 am |
|
|
|
|
Joined: Aug 17, 2011
Posts: 908
Trade Rating: +18
Location: welshpool, mid wales
|
 |
Whats the easiest way to remove it? I have tried hitting it but it doesnt want to come out.
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Thu Apr 05, 2012 10:56 am |
|
|
|
|
Joined: Jan 24, 2010
Posts: 4493
Trade Rating: +4
Location: Hull -or- The World Of Info Code
|
|
Balljoint splitter, the fork type, about £4 from halfords I think.
Or, a pry bar behind the ball joint (Behind as in looking from the wheel arch towards the engine) there's a small area that you can fit a pry bar in and push down on the wishbone and up on the hub to pop the balljoint.
Orrrrrrr, a plank of wood, with a block of wood on the end, the block of wood sits on your subframe, then the plank comes from there and out to where your wishbone is, tie it onto the wishbone with some strong rope or even better some metal chain and stand on it / put pressure on it.
Sidenote: Make sure you've fully removed the pinch bolt as it rests in a recess in the balljoint, loosening it does nothing, it needs to be fully removed 
| | |
|
|
|
|
 | |  |
| The Cars:
VW Golf Mk7 1.6 Derv '13 Plate - The Daily
Peugeot 206 1.1 Zest 3 '05 Plate - Project Car
BMW E46 320CD MSport '54 Plate - The Toy
Peugeot 206 1.6 HDi GTi '06 Plate - O/H's Car | |
 | |  |
|
|
|
|
|
|
|
Posted: Thu Apr 05, 2012 10:59 am |
|
|
|
|
Joined: Feb 08, 2010
Posts: 7045
Trade Rating: +5
Location: In the garage
|
|
You mean pop it out of the hub???
A balljoint splitter will trash the rubber seal.
Does this help?
| | |
|
|
|
|
| | |
| 2001 GTi 138, Bilstein Sprint dampers, H&R springs, 21mm Peugeot Sport torsion bars, 22mm rear ARB, Peugeot Sport Group A wishbones, 283mm discs, Goodridge stainless hoses, Maniflow 304 grade 4-2-1 2.5" manifold and system, 200 cell cat, Richard Longman head, 45mm Jenvey throttle bodies, 9.5mm TB spacers, 90mm air horns, Jenvey throttle linkage, Jenvey fuel rail, Aeromotive and Goodridge fuel fittings and braided hose, ITG sausage filter, Radtec custom radiator, Piper Ultimate Road cams, Piper vernier pulleys, Omex 600 ECU. Saxo electric PAS pump, Vibra Technics engine mounts. Samco coolant hoses, TTV steel flywheel, 4.76 final drive ratio, 307 CC 180 ratios. 2019 BMW 530i. 2017 Mercedes C300 convertible. | |
| | |
|
|
|
|
|
|
|
Posted: Thu Apr 05, 2012 11:10 am |
|
|
|
|
Joined: Aug 17, 2011
Posts: 908
Trade Rating: +18
Location: welshpool, mid wales
|
|
Cheers steve, I have allways had problems with removing them. When I hit it its just bouncing. I will try using a bar.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Apr 05, 2012 11:14 am |
|
|
|
|
Joined: Jan 24, 2010
Posts: 4493
Trade Rating: +4
Location: Hull -or- The World Of Info Code
|
|
Aye it'll naturally bounce back up due to the bushes pushing the wishbone upward and the suspension pushing down, it kinda wants to keep itself held together once you get the balljoint split and out it'll make more sense than how it reads lol..
| | |
|
|
|
|
| | |
| The Cars:
VW Golf Mk7 1.6 Derv '13 Plate - The Daily
Peugeot 206 1.1 Zest 3 '05 Plate - Project Car
BMW E46 320CD MSport '54 Plate - The Toy
Peugeot 206 1.6 HDi GTi '06 Plate - O/H's Car | |
| | |
|
|
|
|
|
|
|
Posted: Thu Apr 05, 2012 12:44 pm |
|
|
|
|
Joined: Aug 04, 2011
Posts: 1343
Trade Rating: 0
Location: Swindon
|
|
Never split one of these before but either a prybar with someone else hitting the joint with two hammers (plenty of videos on youtube) or a scissors type splitter will separate it without damaging the seal.
| | |
|
|
|
|
| | |
| Morris 1000, Austin 1100, Escort Mk2, Fiat Mirafiori, Alfa 33, Alfa GT Junior, Alfasud, Alfetta GTV (2x), Alfa 164 3.0 V6, Alfa 164 2.0, Alfa 75 V6, Alfa 156 2.4 (diesel remapped 200bhp), Alfa 147 GTA (3.6 295bhp), Alfa 159 (diesel remapped 245bhp 300ft.lbs @ 2500rpm)
Why isn't my daughter an Alfaholic? | |
| | |
|
|
|
|
|
|
|
Posted: Thu Apr 05, 2012 1:28 pm |
|
|
|
|
Joined: Aug 17, 2011
Posts: 908
Trade Rating: +18
Location: welshpool, mid wales
|
|
Got it split, used a bar and just kept moving it up and down. Did help by jacking the hub up slightly.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Apr 05, 2012 1:36 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 7093
Trade Rating: +11
Location: Suffolk
|
|
Open up the lower joint with a chisel then pull down with a bar
| | |
|
|
|
|
| | |
| Team Impossible Possible
The only way of finding the limits of the possible is by going beyond them into the impossible - Arthur C. Clarke
Forged 1.6 Turbo
Click to see more
144Bhp @ 7PSi - 193.9Bhp @ 13psi
206 Gti Race Car
Click to see more
For all Race/Track Preparation, Feel Free to PM Me!
Whether its for a custom ratio gearbox or track-day alignment, I can help! | |
| | |
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17130
Online Now [190]:
Visitors: 189
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
