|
Author
|
Message |
|
|
 Posted: Wed Aug 15, 2012 12:12 pm |
|
|
|
|
Joined: Aug 14, 2012
Posts: 58
Trade Rating: 0
Location: Birmingham
|
 |
I'm a new member on here so I just thought I'd post a few pictures of the small project I'm doing.
It's a black 2001 (Y) GLX. At the minute I'm just trying to get it back to standard so it'll pass the MOT and then I'll be looking at doing some basic modifications to it. It also hasn't got any wheels, so I'm deciding whether to get some standard cheap steelies or get some second hand Peugeot wheels (Nimrods/Vortex's etc).
First thing I've tackled is the bodywork. The back bumper was badly cracked, drivers door is dented above the wing mirror, drivers door frame/pillar is dented (it was also sticking out so wouldn't pass the MOT), drivers side wing/arch is dented and the passenger side wing/mirror was replaced by a previous owner, but never painted, so started to rust, so that'll be painted as well.
Few pics to start -
Once the bodywork is finished I'll be looking at getting some wheels and some minor mods.
I'll keep updating on here anyway.
Peace!
| |  |
|
|
 |
Last edited by Resist on Sat Oct 20, 2012 7:36 am; edited 2 times in total
|
|
|
|
|
|
|
Posted: Wed Aug 15, 2012 11:55 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 762
Trade Rating: +13
Location: Margate, Kent
|
|
Good effort so far 
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Aug 21, 2012 2:02 pm |
|
|
|
|
Joined: Aug 14, 2012
Posts: 58
Trade Rating: 0
Location: Birmingham
|
|
Quick update on the progress...
Finally got round to filling and shaping the drivers door pillar, so that's got primer on it and is ready for paint now. The drivers door has also been shaped and is now ready for paint, so all of the panels are ready for paint now.
I managed to find a set of steelies that fit the car, so I've decided to keep these for now and just make them look a bit better by spraying them matte black. As I said before, I'll be looking to get some Peugeot wheels eventually, but these will do for now.
The wheels are primed and ready for the matte black paint. My dad thinks they'll look better if I leave them grey  !
Thanks for looking!
Peace!
Photos:
Driver's side wing - ready for paint
Steelies before:
Steelies after - Ready for paint:
Driver's door pillar - Ready for paint:
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Aug 23, 2012 6:58 am |
|
|
|
|
Joined: Feb 17, 2011
Posts: 1201
Trade Rating: 0
Location: Wiltshire
|
|
|
get some 106 rallye centre trims and make a 206 rllye as they never made one 
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Thu Aug 23, 2012 8:07 am |
|
|
|
|
Joined: Feb 12, 2010
Posts: 4308
Trade Rating: +62
Location: Partying with the Info Shufflers
|
|
Looking really good so far
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Aug 25, 2012 8:06 am |
|
|
|
|
Joined: Jul 18, 2012
Posts: 63
Trade Rating: 0
Location: Melton Mowbray
|
|
Your doing a brill job so far, well done 
| | |
|
|
|
|
 | |  |
| I have a 206 HDI Van 2006. I can honestly say i love my van ♥ | |
 | |  |
|
|
|
|
|
|
|
Posted: Mon Aug 27, 2012 4:51 pm |
|
|
|
|
Joined: Aug 14, 2012
Posts: 58
Trade Rating: 0
Location: Birmingham
|
|
Thanks for the good comments so far guys!
Quick Update...
As I said before, the rear bumper has been taken off because of a big crack on the drivers side corner, which has now been repaired and painted:
The pillar has also been repaired and painted:
The door has also been repaired and painted:
The steelies have been nicely refurbed:
And the drivers side wing has been painted and lacquered:
Once the car is ready for the MOT, I think it'll need a good clean and valet...
Just need to get the rest of the panels lacquered and get some tyres for the MOT, and it'll be pretty much finished!
Plans for the future?
I've decided I'm going to go for a tidy/slightly modified look. I haven't got the time to properly modify it in a style I would like (euro/smooth), but at the same time I think it'll look pretty boring just standard. The steelies are only temporary because I'm looking at getting some Nimrods, and I've already debadged the boot to give it a smoother look. After that, I might look at getting some phase 2 lamps front and back depending on how easy they are to swap.
Anyway, thanks for looking!
Peace!
Thanks for looking!
Peace!
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Aug 28, 2012 7:06 am |
|
|
|
|
Joined: Jul 18, 2012
Posts: 63
Trade Rating: 0
Location: Melton Mowbray
|
|
It all looks very good, i do like steelies prayed up 
I might do that with mine 
| | |
|
|
|
|
| | |
| I have a 206 HDI Van 2006. I can honestly say i love my van ♥ | |
| | |
|
|
|
|
|
|
|
Posted: Sat Sep 01, 2012 2:15 pm |
|
|
|
|
Joined: Aug 14, 2012
Posts: 58
Trade Rating: 0
Location: Birmingham
|
|
Yeah the steelies do look a bit better with a bit of paint!
Quick Update...
Managed to get everything lacquered today, so the car is ready to be put back together tomorrow. Got the back bumper back on today as well, so it's already looking a bit better.
Also got some new tyres because two of the original ones were completely bald.
Pics:
Bumper -
Wing -
Pillar -
Door -
Bumper on the car & Debadged Boot -
Going back again tomorrow to put the car back together, and then on monday the wheels will be balanced because of the new tyres, then hopefully it'll be MOT'd by the end of the week.
Thanks for looking!
Peace!
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Sep 01, 2012 3:54 pm |
|
|
|
|
Joined: Feb 21, 2012
Posts: 2277
Trade Rating: +16
Location: west midlands
|
|
is that a fiesta in the back ground? good work so far.
when you sprayed the pillar how much of it did you re paint? just where yo repaired? what ccolour code is your car? looks gloss and i didnt think you laqured gloss?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sat Sep 01, 2012 6:04 pm |
|
|
|
|
Joined: Aug 14, 2012
Posts: 58
Trade Rating: 0
Location: Birmingham
|
|
Yeah it's an old Fiesta, but it's not mine. It's a project that my Dad's mate is doing.
Most of the paint repair work was done by my Dad. He does car bodywork for a living, and mostly only does small to medium repairs (SMART Repairs).
Most of the panels were repaired by just painting the damaged area and then blending into the rest of the panel. The only ones that weren't done this way were the wings, because both of them needed fully painting.
I'm not sure what the paint code is, but it's just a solid black colour. When my dad looked at the paint code and looked at the ingredients for the mix, there were no metallic flakes or anything, just solid black. When it comes to lacquering, it depends on which paint you buy. I'm not an expert on paints, but I'm pretty sure you can buy some paints that can be sprayed straight on and don't need lacquer, and some paints that need lacquer afterwards. The paint system my dad uses needs lacquer for most of the painting that you do.
For the wheels we used a matte/satin black paint, which we sprayed straight on, and didn't lacquer, which gave it the satin finish.
Thanks for looking!
Peace!
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Sun Sep 02, 2012 5:22 am |
|
|
|
|
Joined: Jul 18, 2012
Posts: 63
Trade Rating: 0
Location: Melton Mowbray
|
|
| Resist wrote: |
Yeah it's an old Fiesta, but it's not mine. It's a project that my Dad's mate is doing.
Most of the paint repair work was done by my Dad. He does car bodywork for a living, and mostly only does small to medium repairs (SMART Repairs).
Most of the panels were repaired by just painting the damaged area and then blending into the rest of the panel. The only ones that weren't done this way were the wings, because both of them needed fully painting.
I'm not sure what the paint code is, but it's just a solid black colour. When my dad looked at the paint code and looked at the ingredients for the mix, there were no metallic flakes or anything, just solid black. When it comes to lacquering, it depends on which paint you buy. I'm not an expert on paints, but I'm pretty sure you can buy some paints that can be sprayed straight on and don't need lacquer, and some paints that need lacquer afterwards. The paint system my dad uses needs lacquer for most of the painting that you do.
For the wheels we used a matte/satin black paint, which we sprayed straight on, and didn't lacquer, which gave it the satin finish.
Thanks for looking!
Peace! |
Well, you have just answered all my questions 
You and your dad have done a good job, it looks so shiny 
My drivers door needs a respray as it has lacquer peel and looks shocking, seeing yours makes me want to sort mine out all the more
Keep us up to date!
| | |
|
|
|
|
| | |
| I have a 206 HDI Van 2006. I can honestly say i love my van ♥ | |
| | |
|
|
|
|
|
|
|
Posted: Sun Sep 02, 2012 12:02 pm |
|
|
|
|
Joined: Aug 14, 2012
Posts: 58
Trade Rating: 0
Location: Birmingham
|
|
Thanks for the positive comments guys!
Update...
Managed to get a lot of the car put together today, both of the wings are on, the drivers door is back on and the front bumper is back on.
Fitted the mirror back onto the driver's door first -
When putting the drivers door and wing back on, I made the mistake of putting the wing on first, which covered the bolts that hold the door on -
So I had to remove the wing, fit the door, and then put the wing back on again.
Got the door and wing back on, then fitted the bumper -
I quickly fitted one of the wheels as well, just to see how they looked on the car. I think it looks pretty good with the black wheels on the black car -
I was planning on fitting everything back together today, but when I tried to fit the drivers headlight, two of the brackets were broken, so I'm going to have to go somewhere to get a new one. I'll probably go to a scrapyard or something and try and find a decent one. I also need to get a new passenger seat because the reclining mechanism on mine has broken.
I'm off on Wednesday and Thursday this week, so I'll probably get some work done then and post another update.
Thanks for looking!
Peace!
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Sep 04, 2012 1:43 am |
|
|
|
|
Joined: Feb 17, 2011
Posts: 1201
Trade Rating: 0
Location: Wiltshire
|
|
why dont you just upgrade them now rather than later if you have to replace one anyway 
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Sep 04, 2012 1:47 am |
|
|
|
|
Joined: Feb 26, 2012
Posts: 247
Trade Rating: +4
Location: Isle of Man
|
|
Looking good
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17126
Online Now [39]:
Visitors: 38
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
