The Peugeot 206 Info Exchange › Forums › The Car › 206 Problems

Forums Home

Forum FAQ

Washer fluid not coming out
Forum Index › 206 Problems

watchs.gif

Author

Message

ed2k12

Posted: Tue Apr 02, 2013 6:10 pm

Joined: Sep 21, 2012
Posts: 7
Trade Rating: 0

I cant get any washer fluid to come out of the bottle and onto my windscreen I pull the washer stalk but no sound is made, I have taken it to a garage and they have said that the pump itself is fine and the fuse was blown however with a new fuse it still fails to work. They suggested a electronic problem. Anyone know the problem, fix or any info to help?

iainlovatt

Posted: Wed Apr 03, 2013 2:51 am

Joined: Feb 07, 2010
Posts: 3935
Trade Rating: +84

dead motor? Its located on the washer bottle! Try a different fuse though and make sure it been put back in the right location!


	Location: Llanfairpwllgwyngyllgogerychwyrndrobwllllantysiliogogogoch (My Garage) member since April 2005 (Now becoming a Veteran) Slideshow of my cars to come!

Mr-Tigger

Posted: Wed Apr 03, 2013 5:12 am

Joined: Mar 15, 2012
Posts: 327
Trade Rating: 0
Location: Essex

def check the fuse,and that its inserted properly,mine has a weird ability of removing itself from the slot on the washer jet for some reason


	Joined the GTi massive 10/1/13 Goodbye lairy Pugani (quicksilver 1.4)

Timon2210

Posted: Wed Apr 03, 2013 12:52 pm

Joined: Feb 10, 2010
Posts: 4266
Trade Rating: +4
Location: Palestine

Probably the motor is dead,best way is to take the wheel liner out,check the plug if there is voltage when someone press it,if not then the fuse is blown


	My 206 Project-Pride & Joy

clintyfitz

Posted: Fri Dec 20, 2013 11:09 am

Joined: Dec 20, 2013
Posts: 1
Trade Rating: 0

I am currently having this problem. The pipes and jets are clear, I have changed the pump and the fuse, the washer still doesn't work. Could there be an earth fault or something else? I am at a loss to figure out what it is.

mtempsch

Posted: Fri Dec 20, 2013 2:50 pm

Joined: Apr 14, 2010
Posts: 713
Trade Rating: +2
Location: Gothenburg, Sweden

clintyfitz wrote:

I am currently having this problem. The pipes and jets are clear, I have changed the pump and the fuse, the washer still doesn't work.
Could there be an earth fault or something else? I am at a loss to figure out what it is.

Get to the plug on the motor and disconnect. Voltmeter to the plug:

Code::

(Trying to use indentation for conditional testing dependent on y/n answers.)
12V? No?  -> Measure positive lead against a good ground. 12V then? 
                  Yes?->bad ground connection. 
                   No?-> bad positive feed.
                       Check continuity on the ground wire to good earth to 
                       check the ground wire as well (so there's not a double
                        fault). 

Yes? -> Is the motor known (tested) good? If not, test it with temp wires
from the/a battery. If if it works then you might have a high resistance 
connection in the wiring (ie measures good 12V with a high resistance 
load like the meter, but prevents the motor from drawing the much higher 
current it needs.

Other then that I'm out of theories...


	Silvermetallic 2004 206 RC

watchs.gif		All times are GMT
Forum Index › 206 Problems Page 1 of 1


	You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum