|
Author
|
Message |
|
|
 Posted: Sun Sep 22, 2013 2:19 pm |
|
|
|
|
Joined: Sep 03, 2013
Posts: 62
Trade Rating: 0
|
 |
Got time to do a little work on the car today so i made a start with relocating to battery to the bood to make way for the turbo to sit.
Then i pulled the front end off to find the reason my fan wasnt working was because the previous owner looks to have tried to remove the fan to paint and snapped the bolt holding it to the fan motor! i also removed the crappy front splitter and replaced it with an astra one. Next was to see where my intercooler and oil cooler ws going to fit in, i managed to get holes drilled for the fmic mounts but need to find some longer bolts what i ill hopefully be able to pick up from work tomorrow.
Could do with a battery box lid but not sure weather they come on the 206 or not?
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Mon Sep 23, 2013 10:31 am |
|
|
|
|
Joined: Feb 07, 2010
Posts: 620
Trade Rating: 0
Location: Malaysia
|
|
| eddy_gti wrote: |
| Any one know the standard compression on the 138 engine? |
10.8.1, u know evo 1-9 piston have same bore and stroke like us 85 x 88
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Sep 23, 2013 11:11 am |
|
|
|
|
Joined: Sep 03, 2013
Posts: 62
Trade Rating: 0
|
|
So the evos pistons and rods are a direct fit in our block?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Sep 23, 2013 12:44 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 7093
Trade Rating: +11
Location: Suffolk
|
|
| eddy_gti wrote: |
| So the evos pistons and rods are a direct fit in our block? |
Rods, no chance. Pistons I highly doubt it.
But try it, you might know someone who can do that for you
| | |
|
|
|
|
 | |  |
| Team Impossible Possible
The only way of finding the limits of the possible is by going beyond them into the impossible - Arthur C. Clarke
Forged 1.6 Turbo
Click to see more
144Bhp @ 7PSi - 193.9Bhp @ 13psi
206 Gti Race Car
Click to see more
For all Race/Track Preparation, Feel Free to PM Me!
Whether its for a custom ratio gearbox or track-day alignment, I can help! | |
 | |  |
|
|
|
|
|
|
|
Posted: Mon Sep 23, 2013 2:51 pm |
|
|
|
|
Joined: Sep 03, 2013
Posts: 62
Trade Rating: 0
|
|
Think al just run the decomp plate
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Mon Sep 23, 2013 3:21 pm |
|
|
|
|
Joined: Feb 08, 2010
Posts: 7045
Trade Rating: +5
Location: In the garage
|
|
How do you know what compression 2 gaskets and a plate will give you?
I'd just turbo the standard engine at first and run low boost just to get it running.
| | |
|
|
|
|
| | |
| 2001 GTi 138, Bilstein Sprint dampers, H&R springs, 21mm Peugeot Sport torsion bars, 22mm rear ARB, Peugeot Sport Group A wishbones, 283mm discs, Goodridge stainless hoses, Maniflow 304 grade 4-2-1 2.5" manifold and system, 200 cell cat, Richard Longman head, 45mm Jenvey throttle bodies, 9.5mm TB spacers, 90mm air horns, Jenvey throttle linkage, Jenvey fuel rail, Aeromotive and Goodridge fuel fittings and braided hose, ITG sausage filter, Radtec custom radiator, Piper Ultimate Road cams, Piper vernier pulleys, Omex 600 ECU. Saxo electric PAS pump, Vibra Technics engine mounts. Samco coolant hoses, TTV steel flywheel, 4.76 final drive ratio, 307 CC 180 ratios. 2019 BMW 530i. 2017 Mercedes C300 convertible. | |
| | |
|
|
|
|
|
|
|
Posted: Mon Sep 23, 2013 7:14 pm |
|
|
|
|
Joined: Sep 03, 2013
Posts: 62
Trade Rating: 0
|
|
That is my plan edward but I want a spare engine just incase anything happens but also plan to build a 3rd engine over time when I get a bit more money behind me so I can run half decent power. I have a mate I sometimes go up knockhill with who is building a 400bhp+ 306 gti6 engine but he is minted so has money to throw at his lol. I am only looking to run around 7-10psi max for the time being.
Fi dropped the turbo off today to have the manifold and downpipe flanges made then I will get the manifold made up towards the end of the week. Also hoping to get my intercooler and other little bits fitted this week so there out the way for when it comes to fitting the rest as I cant really have the car off the road too long due to work.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Sep 24, 2013 5:25 pm |
|
|
|
|
Joined: Sep 03, 2013
Posts: 62
Trade Rating: 0
|
|
|
|
|
|
|
|
|
|
|
Posted: Wed Sep 25, 2013 12:10 pm |
|
|
|
|
Joined: Sep 03, 2013
Posts: 62
Trade Rating: 0
|
|
Well I have just gone and bought an 8v turbo engine. 67k miles so I am going to service the engine and fit all my parts to that instead. I will be happy with 220bhp. Maybe keep hold of the 16v engine and build that up next year.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Sep 25, 2013 1:29 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 729
Trade Rating: 0
Location: Norfolk
|
|
Will the 180 manifold fit on that? Shame as I was interested too see how it was all going to come together
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Sep 25, 2013 1:47 pm |
|
|
|
|
Joined: Sep 03, 2013
Posts: 62
Trade Rating: 0
|
|
No need for the gti 180 manifold on the 8v engine, i can just make up a pipe to bolt to the standard turbo manifold what will bring my turbo rount to be above the gearbox. i might still build the 16v engine as there is only so much you can do with the 8v engines and at least i can do a proper job with the 16v engine having it out the car.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Sep 25, 2013 2:21 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 729
Trade Rating: 0
Location: Norfolk
|
|
Sounds like a lot of work. What 8v engine is it?
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Sep 25, 2013 2:32 pm |
|
|
|
|
Joined: Sep 03, 2013
Posts: 62
Trade Rating: 0
|
|
Its a 406 sri engine. 2.0l 8v turbo with 8:1 flat top pistons. Will be running my td04 instead of the standard t25
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Wed Sep 25, 2013 3:56 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 7093
Trade Rating: +11
Location: Suffolk
|
|
220?! So I may well be on par with a mear 1.4 8 valve. Stop faffing about and hit over 300 to at least make it worth it!
| | |
|
|
|
|
| | |
| Team Impossible Possible
The only way of finding the limits of the possible is by going beyond them into the impossible - Arthur C. Clarke
Forged 1.6 Turbo
Click to see more
144Bhp @ 7PSi - 193.9Bhp @ 13psi
206 Gti Race Car
Click to see more
For all Race/Track Preparation, Feel Free to PM Me!
Whether its for a custom ratio gearbox or track-day alignment, I can help! | |
| | |
|
|
|
|
|
|
|
Posted: Wed Sep 25, 2013 4:41 pm |
|
|
|
|
Joined: Sep 03, 2013
Posts: 62
Trade Rating: 0
|
|
Am not bothered about having mental power. Cars going to be an everyday car no no point going daft and spending a fortune. As said I will have the 16v engine out of the car so makes things easier to work on and build a decent spec. Trying to get a new job, thats the reason for working at a budget for the minute
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17123
Online Now [302]:
Visitors: 301
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
