The Peugeot 206 Info Exchange › Forums › The Car › 206 Problems

Forums Home

Forum FAQ

Clutch problems :(
Forum Index › 206 Problems

watchs.gif

Author

Message

le0n2014

Posted: Thu Oct 23, 2014 3:51 pm

Joined: Mar 22, 2014
Posts: 19
Trade Rating: 0

just had to put a new box (saxo, was sold as a 206 only to find it wasnt when i got home) on my 1.4 glx W reg due to a ticking sound when coasting.

got everything sorted all gears selectable etc but the clutch pedal kept slipping from to time to time like it was catching somewhere (i had this problem before i changed gearbox also, but now it had got worse after changing the box), so i took a cable i had lying around from a 1.1i 206 id had previously, and fitted that. now my clutch pedal is really high and the biting point is right at the top of the pedal. if you adjust the pedal via the bolt the biting point gets weaker and weaker as the bolt is tightened, then after tightening for so long youre unable to select any gears.

im sick of constantly chucking money at the car problem after problem ahhh the joys of french cars!

any help appreciated

ukskater01

Posted: Thu Oct 23, 2014 4:01 pm

Joined: Jul 13, 2010
Posts: 1032
Trade Rating: +10
Location: sutton surrey/welwyn garden city

You will probably have to fit a new cable


	You never really learn to swear until you learn to drive

kandlbarrett

Posted: Sun Oct 26, 2014 5:31 pm

Joined: Aug 04, 2011
Posts: 1343
Trade Rating: 0
Location: Swindon

new cable required. Buy genuine Peugeot it will make the job much easier. Battery out, battery tray out, coolant header tank out.

Haynes manual has a good description.

The hardest part is catching the cable on the pedal. Very long thin fingers, almost stand on your head under the dash and work blind. I can do that bit in 2 or 3 mins now but first one was over an hour just to get the cable on the pedal. A genuine cable makes that bit so much easier.


	Morris 1000, Austin 1100, Escort Mk2, Fiat Mirafiori, Alfa 33, Alfa GT Junior, Alfasud, Alfetta GTV (2x), Alfa 164 3.0 V6, Alfa 164 2.0, Alfa 75 V6, Alfa 156 2.4 (diesel remapped 200bhp), Alfa 147 GTA (3.6 295bhp), Alfa 159 (diesel remapped 245bhp 300ft.lbs @ 2500rpm) Why isn't my daughter an Alfaholic?

guy4568

Posted: Sat Mar 07, 2015 1:59 pm

Joined: Mar 07, 2015
Posts: 1
Trade Rating: 0

A late reply i know, but one for the future. My sons (206 1.1 2004) was the same. It had a very high biting point, but I could manage to stall the vehicle, so pointing towards the automatic adjusting clutch cable being faulty.

Cost £34 from Peugeot dealer.

As Kandlbarrett above, but my hands are too large to fit the cable to the pedal.

believe it or not I had to remove the entire steering column to gain enough room to fit the cable to the pedal. The Haynes manual also mentions that you may need to do this. It took about one and a half hours to take it out, 5 seconds to fit the cable and then about 20mins to refit the column.

Clutch now works perfectly

kandlbarrett

Posted: Sun Mar 08, 2015 12:58 pm

Joined: Aug 04, 2011
Posts: 1343
Trade Rating: 0
Location: Swindon

Those cables really are fun and you do need piano player fingers to reach and do it without removing everything.


	Morris 1000, Austin 1100, Escort Mk2, Fiat Mirafiori, Alfa 33, Alfa GT Junior, Alfasud, Alfetta GTV (2x), Alfa 164 3.0 V6, Alfa 164 2.0, Alfa 75 V6, Alfa 156 2.4 (diesel remapped 200bhp), Alfa 147 GTA (3.6 295bhp), Alfa 159 (diesel remapped 245bhp 300ft.lbs @ 2500rpm) Why isn't my daughter an Alfaholic?

watchs.gif		All times are GMT
Forum Index › 206 Problems Page 1 of 1


	You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum