|
Author
|
Message |
|
|
 Posted: Mon Sep 14, 2015 8:18 am |
|
|
|
|
Joined: Nov 03, 2013
Posts: 32
Trade Rating: 0
Location: bromley, kent
|
 |
hi all, just got PP2000 to tryand sort out a non start situation. reads an engine ecu intermittent fault -ignition,integrated phase detection. ifi then go into PP further it is showing the info below on the power supply and immobiliser screen.
BATTERY ... 12.8V
CONTROL SUPPLY RELAY ... INACTIVE
STATUS OF THE ECU ... ECU LOCKED
STATUS OF CODED ENGINE IMMOBILISER PROGRM ... MATCHED ECU
PROBLEMS DETECTEDWHEN TRANSMITTING THE UNLOCK CODE....1,000000
I am assuming that the immobiliser is not turning off and that's why it wont start. it turns over as normal but wont fire and run. it just happened one morning, my daughter went to start it and it wouldn't fire up. had been running fine before with no problems. so my question is this, can a key suddenly lose its code, is the ecu faulty, can I re-initialise the key if that's the problem ( there's only one key ), I don't have the customer 4 digit security code. do I need to re code the key? or has anyone any other ideas about the non start problem.
| |  |
|
|
 |
|
|
|
|
|
|
Posted: Mon Sep 14, 2015 1:05 pm |
|
|
|
|
Joined: Feb 07, 2010
Posts: 2718
Trade Rating: +6
Location: UK
|
|
Sounds like immobiliser, but your battery is low on volts as well be the looks.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Sep 15, 2015 9:38 am |
|
|
|
|
Joined: Feb 10, 2010
Posts: 4266
Trade Rating: +4
Location: Palestine
|
|
if that only happen in the morning,and cold start,I would suspect the battery to be weak and on it's way out,if you got another car,try to swap battery for a test,then see how it goes.
| | |
|
|
|
|
|
|
|
|
|
|
Posted: Tue Sep 15, 2015 11:32 am |
|
|
|
|
Joined: Nov 27, 2010
Posts: 11520
Trade Rating: +10
Location: What's it to you? ? ?
|
|
More details of the car needed please, we know its a 206 but what year & engine combination?
| | |
|
|
|
|
 | |  |
| Toyota C-HR GR Sport 2.0 Hybrid with JBL & Alcantara packs. | |
 | |  |
|
|
|
|
|
|
|
Posted: Sat Sep 26, 2015 5:08 am |
|
|
|
|
Joined: Aug 01, 2011
Posts: 390
Trade Rating: 0
Location: Bath UK
|
|
I had a recurring symptom of a "Engine turns strongly but no start" on Pug 306 which was immobiliser related and was a simple poor electrical contact at the immobiliser ring around ignition barrel. Symptoms were- Once started it would be fine for the rest of the day with many no fault starts but the next morning- same again- engine turns but no start
PP was stating ECU locked
A clean with electrical cleaner spray on the connector solved it
| | |
|
|
|
|
|
|
|
|
Membership:
Latest: 
New Today: 0
New Yesterday: 0
Overall: 17128
Online Now [100]:
Visitors: 99
Members: 0
Staff Online Now:
Page Views:
General
Forums Home
Forum FAQ
Search
