Author
|
Message |
|
Posted: Thu Jun 09, 2016 12:58 pm |
|
|
|
Joined: Jan 23, 2011 Posts: 42
Trade Rating: 0
Location: Earth
|
|
Hi guys
Have to replace the gearbox oil. What brand is the Peugeot OEM ?
Im wondering if use a 75w90 castrol its ok
Thanks!
| | |
|
|
|
|
|
|
|
Posted: Thu Jun 09, 2016 1:02 pm |
|
|
|
Joined: Feb 09, 2010 Posts: 1331
Trade Rating: +6
Location: SW England
|
|
Check your handbook if you have it. But I used 75w90 and didn't run into any problems. This was used on my GTI 138..
| | |
|
|
|
| | |
| 206 GTi 180 - 406 brembos with 283mm discs, coilovers and Sparco bucket seats | |
| | |
|
|
|
|
|
Posted: Thu Jun 09, 2016 1:14 pm |
|
|
|
Joined: Jan 23, 2011 Posts: 42
Trade Rating: 0
Location: Earth
|
|
Ive just read 75w80 is better option...
| | |
|
|
|
|
|
|
|
Posted: Thu Jun 09, 2016 1:17 pm |
|
|
|
Joined: Feb 09, 2010 Posts: 1331
Trade Rating: +6
Location: SW England
|
|
I don't know much about oil, but IIRC the numbers represent how the oil reacts at different temperatures. So it's actually all dependent how you're going to drive and the outside temperature / weather
| | |
|
|
|
| | |
| 206 GTi 180 - 406 brembos with 283mm discs, coilovers and Sparco bucket seats | |
| | |
|
|
|
|
|
Posted: Thu Jun 09, 2016 5:22 pm |
|
|
|
Joined: Feb 07, 2010 Posts: 2718
Trade Rating: +6
Location: UK
|
|
Stick with 75/80
| | |
|
|
|
|
|
|
|
Posted: Fri Jun 10, 2016 1:15 pm |
|
|
|
Joined: Feb 16, 2010 Posts: 440
Trade Rating: +2
Location: Devon
|
|
|
|
|
|
|
|
Posted: Fri Jun 10, 2016 3:10 pm |
|
|
|
Joined: Apr 09, 2014 Posts: 205
Trade Rating: 0
|
|
Total 75w80 just changed mine for that and it is silky smooth. Remember to change it when the oil is warm but careful not to burn your hand!!
| | |
|
|
|
|
|
|
|
Posted: Fri Jun 10, 2016 4:49 pm |
|
|
|
Joined: Jan 23, 2011 Posts: 42
Trade Rating: 0
Location: Earth
|
|
Yeah,will use total 75w80. Can i change the oil only using a jack to lift the car? Dont know how (un)accesible is the screw to remove the oil
| | |
|
|
|
|
|
|
|
Posted: Fri Jun 10, 2016 7:00 pm |
|
|
|
Joined: Apr 09, 2014 Posts: 205
Trade Rating: 0
|
|
Yeah you can I just jacked mine up took wheel off. You can reach under the front of the car without lying under it and undo the drain nut. My advice would be to take the filler nut off first though to make sure you can fill it back up!
| | |
|
|
|
|
|
|
|
Posted: Fri Jun 10, 2016 8:13 pm |
|
|
|
Joined: Jan 23, 2011 Posts: 42
Trade Rating: 0
Location: Earth
|
|
thats a good point, thanks!!
| | |
|
|
|
|
|
|
|