The Peugeot 206 Info Exchange › Forums › The Car › 206 Problems

Forums Home

Forum FAQ

Inside blowers dont work.
Forum Index › 206 Problems
Go to page 1, 2 Next

watchs.gif

Author

Message

GTIboyracer206

Posted: Mon Feb 14, 2011 5:09 pm

Joined: Feb 13, 2011
Posts: 26
Trade Rating: 0
Location: Leeds.

Hi there, the inside blowers for the heater dont work. This is one of the jobs i need to get fixed before i start using the car, but im a bit stumped as to what it could be. Only just bought the car and it has recently had the clutch done and the blowers havent worked since. What could this possibly be?


	www.facebook.com/?ref=...=523780638

Edward

Posted: Mon Feb 14, 2011 5:14 pm

Joined: Feb 08, 2010
Posts: 7043
Trade Rating: +5
Location: In the garage

Chances are the fan is knackered. Might as well buy a new one.


	2001 GTi 138, Bilstein Sprint dampers, H&R springs, 21mm Peugeot Sport torsion bars, 22mm rear ARB, Peugeot Sport Group A wishbones, 283mm discs, Goodridge stainless hoses, Maniflow 304 grade 4-2-1 2.5" manifold and system, 200 cell cat, Richard Longman head, 45mm Jenvey throttle bodies, 9.5mm TB spacers, 90mm air horns, Jenvey throttle linkage, Jenvey fuel rail, Aeromotive and Goodridge fuel fittings and braided hose, ITG sausage filter, Radtec custom radiator, Piper Ultimate Road cams, Piper vernier pulleys, Omex 600 ECU. Saxo electric PAS pump, Vibra Technics engine mounts. Samco coolant hoses, TTV steel flywheel, 4.76 final drive ratio, 307 CC 180 ratios. 2019 BMW 530i. 2017 Mercedes C300 convertible.

roberto.f

Posted: Mon Feb 14, 2011 5:19 pm

Joined: Feb 22, 2010
Posts: 311
Trade Rating: +4
Location: Coventry/Manchester

Whenever anything goes, it's always a good idea to check the fuse.


	Jun 09 - Nov 09: Peugeot 106 1.1 Independence Nov 09 - January 10: Vauxhall Astra 1.6 8v Club January 10 - June 10: Peugeot 206 1.4 GLX June 10 - Present: Peugeot 206 2.0 GTi

thompson69

Posted: Mon Feb 14, 2011 5:21 pm

Joined: Dec 15, 2010
Posts: 316
Trade Rating: +5
Location: bishop auckland

roberto.f wrote:

Whenever anything goes, it's always a good idea to check the fuse.

yer try the cheapest thing first lol


	1999 1.6 v8 ripspeed front door speckers, jbl back door speskers, vibe slick 6x9s. gti steering wheel, momo gear knob, debadged, after market bonnet vents, m3 mirrors with leds and info sticker

GTIboyracer206

Posted: Mon Feb 14, 2011 5:29 pm

Joined: Feb 13, 2011
Posts: 26
Trade Rating: 0
Location: Leeds.

Okay, thanks guys.


	www.facebook.com/?ref=...=523780638

Twidly

Posted: Mon Feb 14, 2011 5:34 pm

Joined: Sep 12, 2010
Posts: 642
Trade Rating: +1
Location: Home - Norfolk, Uni - Preston

I wouldn't recommend playing with fuses...


	China Blue 2.0 HDi DTurbo -Sports Bumpers -Rear Spoiler -Rear Lexus Lights -SP Fuel Cap -SP Bonnet Vent -SP Upper Grille -SP Lower Grille (Zunsport) -Crystals

perry081064

Posted: Mon Feb 14, 2011 5:39 pm

Joined: Dec 23, 2010
Posts: 430
Trade Rating: +8
Location: staffordshire

Twidly wrote:

I wouldn't recommend playing with fuses... Laughing

you wouldnt believe how careful i am since reading your story twidly Smile


	206 2.0 HDI

stevedude

Posted: Mon Feb 14, 2011 6:01 pm

Joined: Jan 13, 2011
Posts: 664
Trade Rating: 0
Location: aldershot

nope, i know this one, i got caught on it before, but was a 306, now whats the bloody thing called? er the resistor. im sure thats what its called. i changed the fan and the heater control panel, still didnt work, then i tried the resistor, bingo lol talk about learn the hard way


	Happydays

GTIboyracer206

Posted: Mon Feb 14, 2011 6:02 pm

Joined: Feb 13, 2011
Posts: 26
Trade Rating: 0
Location: Leeds.

stevedude wrote:

nope, i know this one, i got caught on it before, but was a 306, now whats the bloody thing called? er the resistor. im sure thats what its called.
i changed the fan and the heater control panel, still didnt work, then i tried the resistor, bingo lol
talk about learn the hard way

Thanks very much for the guidance.


	www.facebook.com/?ref=...=523780638

Rob2859

Posted: Mon Feb 14, 2011 8:58 pm

Joined: Mar 29, 2010
Posts: 3977
Trade Rating: +15
Location: Halifax

big plug in the passenger footwell. Mine has a doggy connection and it stopped it working.

Edward

Posted: Tue Feb 15, 2011 3:08 am

Joined: Feb 08, 2010
Posts: 7043
Trade Rating: +5
Location: In the garage

There are no resistors on the GTi fan set up...it's all controlled by the climate control screen.


	2001 GTi 138, Bilstein Sprint dampers, H&R springs, 21mm Peugeot Sport torsion bars, 22mm rear ARB, Peugeot Sport Group A wishbones, 283mm discs, Goodridge stainless hoses, Maniflow 304 grade 4-2-1 2.5" manifold and system, 200 cell cat, Richard Longman head, 45mm Jenvey throttle bodies, 9.5mm TB spacers, 90mm air horns, Jenvey throttle linkage, Jenvey fuel rail, Aeromotive and Goodridge fuel fittings and braided hose, ITG sausage filter, Radtec custom radiator, Piper Ultimate Road cams, Piper vernier pulleys, Omex 600 ECU. Saxo electric PAS pump, Vibra Technics engine mounts. Samco coolant hoses, TTV steel flywheel, 4.76 final drive ratio, 307 CC 180 ratios. 2019 BMW 530i. 2017 Mercedes C300 convertible.

stevedude

Posted: Tue Feb 15, 2011 10:15 am

Joined: Jan 13, 2011
Posts: 664
Trade Rating: 0
Location: aldershot

Edward wrote:

There are no resistors on the GTi fan set up...it's all controlled by the climate control screen.

lol like id know that Crying or Very sad


	Happydays

Rick_A

Posted: Sat Feb 19, 2011 6:23 am

Joined: Feb 18, 2011
Posts: 4
Trade Rating: 0
Location: Perthshire

Hello guys, first post.
I have just bought a Y reg 2001 206 2.0 hdi. The fan blowers do not work through the climate control unit, but the fan is working when given a live feed so has been bypassed and put onto a switch that turns the fan on or off so i have the blower on full until i get it fixed. All other buttons and fucntions of the climate unit work. Car also has aircon.
From this I gather that the heater resistor has failed, does anyone have a part number for the part to replace it? The dealers have a choice of 4 resistors that it could be and have asked me to bring it in. Cheers Rick

robertmarcs

Posted: Sat Feb 19, 2011 7:09 am

Joined: Feb 07, 2010
Posts: 632
Trade Rating: +7
Location: carmarthen

just change the blower. easy job get under the passenger side of the dash n u cn see it in the middle. unplug it then get a good grip n twist it counterclockwise. itll pop out. then just refit in reverse order but i had to use a crowbar to help turn it back and click into place.

Edward

Posted: Sat Feb 19, 2011 7:23 am

Joined: Feb 08, 2010
Posts: 7043
Trade Rating: +5
Location: In the garage

Rick_A wrote:

I have just bought a Y reg 2001 206 2.0 hdi. The fan blowers do not work through the climate control unit

A Y reg 2.0 HDi with climate control?


	2001 GTi 138, Bilstein Sprint dampers, H&R springs, 21mm Peugeot Sport torsion bars, 22mm rear ARB, Peugeot Sport Group A wishbones, 283mm discs, Goodridge stainless hoses, Maniflow 304 grade 4-2-1 2.5" manifold and system, 200 cell cat, Richard Longman head, 45mm Jenvey throttle bodies, 9.5mm TB spacers, 90mm air horns, Jenvey throttle linkage, Jenvey fuel rail, Aeromotive and Goodridge fuel fittings and braided hose, ITG sausage filter, Radtec custom radiator, Piper Ultimate Road cams, Piper vernier pulleys, Omex 600 ECU. Saxo electric PAS pump, Vibra Technics engine mounts. Samco coolant hoses, TTV steel flywheel, 4.76 final drive ratio, 307 CC 180 ratios. 2019 BMW 530i. 2017 Mercedes C300 convertible.

watchs.gif		All times are GMT Go to page 1, 2 Next
Forum Index › 206 Problems Page 1 of 2


	You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum