Joined: Sep 11, 2013 Posts: 134
Trade Rating: 0
|
|
I have had 307 challenger alloys with 205/40/17 on my 2.0 hdi now for a few months and Im happy with them.
The front is lowered on Eibach springs, and I haven't lowered the rear, yet.....
The problem I have is that the front wheels appear to stick out and fill the arches more than the rears, are the rear axels narrower on the rear than the front?
Has anyone fitted spacers to the rear, if so what sort of size can I fit to try and fill the arches?
I realise the offset is slightly different on the challenger as apposed to the vortex alloys so my wheels are sitting 3mm inwards and are .5" narrower so will be sitting 9mm further in than a set of vortex alloys would be.
Any advice as to how much wider I can make the rear without having major problems would be much appreciated.
Thank You
| | |
|
|